Best current price£27.60from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£27.60Visit shop Kraus & Naimer KG10B.T103/01.E Isolator Switch Lockable 20A 90° Black
Visit shop9 offers from £27.60 - £70.60
View price history by clicking the chart icon.
This Kraus & Naimer 3-pole main switch (MPN: 70010154) is designed for industrial applications requiring reliable power control. It is ideal for electricians and maintenance personnel needing to safely isolate equipment. A key benefit is its robust IP66/67 rating and padlockable functionality for enhanced safety. However, it requires panel mounting and is intended for systems up to 5.5 kW.
| Model Part Number | 70010154 |
|---|---|
| Brand | Kraus & Naimer |
This switch has an IP66/67 protection rating, meaning it is protected against dust ingress and high-pressure water jets, and can withstand temporary immersion in water.
While it is a 3-pole switch, it can be wired to control single-phase loads by only using the necessary poles, but it is primarily designed for 3-phase applications.
The switch is rated for 5.5 kW at AC-3 380-440V.
Utilize the padlock functionality to lock the switch in the '0' (off) position. This prevents accidental re-energization of the circuit during maintenance.
The switch uses screw terminals for electrical connections.
The switching angle is 1 x 90 degrees, providing distinct ON and OFF positions.
Yes, its IP66/67 rating makes it highly resistant to environmental factors, suitable for many outdoor industrial applications.
Ensure mounting is secure and not overtightening screws. Check for obstructions around the rotary knob. If panel mounting is causing stress, re-evaluate panel flatness and mounting hole alignment.
Verify that the switch is fully in the '0' position. Ensure the padlock shackle is of appropriate size and not interfering with the switch mechanism. Check for any debris in the lock cylinder.
Check all screw terminal connections for tightness. Ensure conductors are properly stripped and inserted. Verify that the circuit being controlled does not exceed the 25A rating.
Re-tighten the four mounting screws securing the switch to the panel. Ensure the panel itself is rigid and not flexing, which can loosen the mounting.
Setup: This switch is designed for front mounting onto a control panel using its four-hole configuration. Ensure the panel surface is clean and provides a stable mounting point. Connect the appropriate conductors to the screw terminals, observing correct polarity and torque settings. The rotary knob and padlock mechanism should be checked for free movement before final installation.
Compatibility: Primarily compatible with 3-phase electrical systems within the specified voltage and current ratings (AC-3 380-440V, 25A).
Care: Maintain the switch by periodically cleaning the exterior with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners. Ensure the area around the switch remains free of dust and debris. Periodically check the padlock mechanism and rotary knob for proper function. After cleaning, ensure the switch is completely dry before re-energizing the circuit.
