Best current price£10.75from eBay
Shopping.co.uk recommended and popular offers
eBay£10.75Visit shop IEC C14 to 6 Way Gang UK Mains Sockets Lead UPS Power Splitter 1m Black
Visit shop
B&Q£10.79Visit shop B&Q - Iec C14 To 6 Way Gang Uk Mains Sockets Lead Ups Power Splitter 1M Black
Visit shop2 offers from £10.75 - £10.79
View price history by clicking the chart icon.
This 1-meter Kenable power splitter is designed for users needing to connect multiple UK 3-pin devices to a single C14 IEC input, commonly found on Uninterruptible Power Supplies (UPS). Its key benefit is expanding a single power output to six, efficiently powering various peripherals. A potential caveat is ensuring the total load does not exceed the 13A rating.
| Colour | Black |
|---|---|
| Model Part Number | 011092 |
| Brand | kenable |
The splitter is rated for a maximum load of 13 Amps and 250 Volts AC, which equates to approximately 3250 Watts at 250V.
No, this splitter is designed to connect to a device with a C14 IEC input port, such as a UPS or server. It does not plug directly into a standard UK wall socket.
The cable has a diameter of 8mm and is printed with '3G1.5mm2 QINOPU HO5VV-F BS 1363/A SS 145/A MS 586'.
No, the cable length is fixed at 1 meter.
It is not recommended to connect high-power appliances simultaneously as they can easily exceed the 13A total load limit, potentially causing overheating or damage.
A C14 IEC connection is a standard type of power connector used on many electronic devices, including UPS units, computer power supplies, and some monitors, allowing for a secure power input.
Ensure the C14 plug is fully inserted into the power source. Verify that the power source (e.g., UPS) is active and within its load capacity. Check the main power switch on the splitter (if applicable) and the individual device power switches.
Check if the total power drawn by all connected devices exceeds the 13A rating. Try plugging the device into a different socket on the splitter. Inspect the non-working socket for any visible damage or obstruction.
A slight warmth may be normal under moderate load. However, if the cable becomes excessively hot, immediately disconnect all devices and check the total power consumption. Ensure the cable is not kinked or covered, allowing for proper heat dissipation. If the heat persists or is extreme, discontinue use.
Setup: To set up the splitter, simply connect the C14 IEC plug into the corresponding C15 socket on your power source, typically a UPS. Then, plug up to six UK 3-pin mains devices into the six available sockets. Ensure all connections are secure.
Compatibility: This splitter is compatible with any device that has a C14 IEC input port on the power source and requires standard UK 3-pin plugs for the devices being powered. It is not compatible with C5, C7, C13, or other non-standard IEC connectors.
Care: Keep the splitter in a dry, well-ventilated area. Avoid exposing it to moisture or extreme temperatures. Periodically check the cable and plugs for any signs of damage. Clean with a dry or slightly damp cloth only; do not use liquid cleaners.
