Best current price£17.99from Robert Dyas
Shopping.co.uk recommended and popular offers
Robert Dyas£17.99Visit shop HexGuard Noblessa Static Cling Window Film - 90cm x 1.5m - Clear
Visit shop
B&Q£18.97Visit shop - Noblessa Cobuk 90Cm X 1.5M Premium Static Cling Window Film For Privacy And Décor
Visit shop2 offers from £17.99 - £18.97
View price history by clicking the chart icon.
The Noblessa Cobuk Premium Static Cling Window Film is a DIY solution for individuals seeking to enhance privacy or add décor to windows, doors, and shower screens without the cost and hassle of traditional blinds or curtains. Its key benefit is providing instant privacy and decorative effects without blocking natural light. A minor caveat is the need to leave a small gap from window seals to ensure proper adhesion. This film offers a clean, modern alternative, applying easily with water and static cling technology, leaving no residue and protecting against 95% of UV rays.
| Colour | White |
|---|---|
| Model Part Number | 305-5209 |
| Brand | HexGuard |
Clean the glass thoroughly, spray it generously with water, remove the backing paper from the film, and apply the static side down onto the wet glass. Use a squeegee to remove excess water and air bubbles, ensuring a small gap from the window seal.
Yes, the Noblessa Cobuk film is designed to be removable and reusable. Simply peel it off carefully and reapply it to another suitable glass surface.
It is best suited for clean, smooth, flat glass surfaces. It may not adhere well to textured, frosted, or uneven glass.
No, it enhances privacy and décor while allowing natural light to pass through. It also reduces glare.
The film provides 95% UV protection, helping to prevent fading of indoor furnishings and reducing heat.
You can clean it using a soft, damp cloth and mild household cleaners. It's recommended to wipe up spills promptly to avoid staining.
If you make a mistake, you can peel the film back and reposition it. The water-based application allows for adjustments until you achieve a perfect finish.
The product comes with a 1-Year Guarantee.
Ensure the glass was thoroughly cleaned and sufficiently wet. Re-wet the glass and the film's static side, then reapply, smoothing out bubbles carefully. Check that a small gap is maintained from the window seal.
Use a piece of clear tape to lift a corner of the backing paper, or try gently peeling from a corner with your fingernail.
This is often due to contact with the rubber seal. Ensure a small gap (approx. 1-2mm) is left between the film and the seal. Reapply if necessary.
Clean gently with a soft, damp cloth. Avoid abrasive cleaners or tools. Wipe spills immediately.
Setup:
Compatibility:
Care:
