Best current price£14.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£14.90Visit shop VEVOR Garage Door Seal Top and Sides Seal Strip, 34 FT Universal Weather Stripping Replacement Soft and Hard Composite, Weatherproofing Garage Door TPE Seals with Adhesive Backed and Screws, White
Visit shop1 offer from £14.90
View price history by clicking the chart icon.
The VEVOR 34-foot garage door seal strip is designed for homeowners and commercial facility managers looking to improve insulation and cleanliness at the top and sides of their garage entryways. By effectively blocking out wind, dust, pests, and debris, this weather stripping helps maintain a more stable indoor temperature and a cleaner workspace; however, the adhesive requires a perfectly clean and dry surface for optimal, long-term adhesion.
| Model Part Number | MH1400-34ft |
|---|---|
| Brand | VEVOR |
This specific seal is designed for the top and sides. The bottom of a garage door typically requires a heavier-duty threshold seal or a U-shaped rubber seal due to floor compression.
While the material is flexible and durable, it is not specifically designed to be painted. Painting may cause the coating to crack due to the flexibility of the seal.
You will need a measuring tape, a utility knife for cutting the strip, and a screwdriver or drill for the included screws.
This seal is for the top and sides, so it does not interact with the floor. If you have gaps at the floor, you will need a separate garage door threshold seal.
It is best to install in temperatures above 50°F (10°C) to ensure the adhesive cures properly. If it is too cold, the adhesive will not bond effectively.
The surface was likely not clean or dry enough during application. Remove the strip, clean the frame thoroughly with isopropyl alcohol, and re-apply using the provided screws to secure it.
The seal may be positioned too tightly against the door. Adjust the placement of the strip slightly to allow for a snug fit without hindering the door's movement.
To install, first clean the door frame thoroughly with an alcohol-based cleaner to remove grease, dirt, and paint flakes. Allow the surface to dry completely before applying the strip. Peel back the adhesive backing and press the strip firmly along the frame. For a permanent installation, use the provided screws at intervals along the strip to ensure it stays in place throughout seasonal changes. For care, simply wipe the seal down with a damp cloth if it becomes dusty; avoid using harsh chemical solvents that could degrade the material's elasticity over time.
