Best current price£103.04from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£103.04Visit shop Araldite Crystal Clear Epoxy Adhesive 2 X 15Ml Tubes (12 Packs) - Strong 2-Part Glue For Glass, Jewellery & Ceramics 5056660412870
Visit shop1 offer from £103.04
View price history by clicking the chart icon.
This Araldite Crystal Clear Epoxy Adhesive is for DIY enthusiasts, crafters, and professionals needing durable, transparent bonds. Its key benefit is a strong, invisible repair on various materials. A caveat is that proper mixing and curing time are essential for optimal results. This guide covers its features, performance, setup, and troubleshooting for effective use.
| Colour | White |
|---|---|
| Brand | Araldite |
The handling time is typically 5 minutes, and it achieves handling strength within 1 hour. Full cure, providing maximum bond strength, usually takes 12-24 hours, depending on temperature and humidity.
This epoxy is best suited for rigid materials. It may not perform well on very flexible plastics that require a bond that can bend or stretch.
Once fully cured, Araldite Crystal Clear Epoxy Adhesive is resistant to water and moisture, making it suitable for many household repairs that might come into contact with water.
Store unused tubes tightly capped in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
Unopened, when stored correctly, the shelf life is typically around 2 years. Once mixed, the adhesive must be used immediately.
Yes, once fully cured, the adhesive can be sanded and painted to match the surrounding surface.
Each pack contains two 15ml tubes, for a total of 30ml per pack. A 12-pack provides a total of 360ml of adhesive (12 packs x 30ml).
Ensure equal amounts of resin and hardener were used and mixed thoroughly for the recommended time. Check the expiration dates of the product. Ensure the temperature is within the recommended range for curing.
Surfaces may not have been properly prepared. Ensure they are clean, dry, and free from dust, oil, or contaminants. Roughening smooth surfaces slightly can improve grip.
This can occur with prolonged exposure to UV light. For applications requiring extreme UV resistance, consider a different type of adhesive or protect the bond from direct sunlight.
Ensure you are squeezing from the correct ends of the tubes and dispensing equal volumes. If tubes are old, the contents may have hardened slightly; try gently warming them (do not overheat).
Setup: To use, ensure surfaces to be bonded are clean, dry, and free from dust or grease. Squeeze equal amounts of resin and hardener onto a clean disposable surface. Mix thoroughly for the specified time (typically 1 minute) until a uniform color is achieved. Apply the mixed adhesive to one surface and join the parts, holding them firmly in place.
Compatibility: This epoxy bonds well with glass, ceramics, metal, wood, concrete, leather, and most rigid plastics. It is not recommended for use on polyethylene, PTFE, or silicone rubber. Test on an inconspicuous area if unsure about compatibility.
Care: Store unused tubes sealed in their original packaging in a cool, dry place. Clean up any uncured adhesive immediately with a damp cloth. Once cured, the adhesive is generally resistant to water and mild solvents, but prolonged immersion or harsh chemical exposure should be avoided.
