Brass Plumbing Fittings - PEPTE
Best current price£13.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£13.99Visit shop - Brass Plumbing Fittings For Solder With Copper Pipes 15mm X 1/2Inch Inch Female Bsp
Visit shopB&Q£13.99Visit shop One Offer
1 offer from £13.99
View price history by clicking the chart icon.
B&Q - Brass Plumbing Fittings For Solder With Copper Pipes 15mm X 1/2Inch Inch Female Bsp
Free delivery in 1–3 days
£13.99
Visit shop
Product Information
Full details
This PEPTE Brass Plumbing Fitting is designed for plumbers and DIY enthusiasts needing to connect 15mm copper pipes to 1/2" BSP female threaded connections. Its primary benefit is ensuring a secure and reliable soldered joint between dissimilar pipe types. A key consideration is that it requires soldering for installation, which demands specific tools and skills.
All features
| Brand | PEPTE |
|---|
Extended Product Information
FAQs
What is BSP thread?
BSP stands for British Standard Pipe. It is a set of technical standards for mechanical pipe and pipe fittings.
The 1/2" designation refers to the nominal bore size of the pipe that the thread is associated with.
Can this fitting be used with plastic pipes?
No, this fitting is specifically designed for connecting copper pipes via soldering and threaded connections. It is not compatible with plastic pipe systems.
What type of solder should I use?
For potable water systems, it is recommended to use lead-free solder that is certified for drinking water applications.
How do I clean the copper pipe before soldering?
Use a pipe cleaning brush or abrasive cloth to remove any oxidation or debris from the end of the copper pipe. Ensure the surface is clean and bright before applying flux.
What is the benefit of using brass fittings?
Brass offers excellent corrosion resistance, durability, and is easy to machine, making it a popular choice for plumbing fittings. It provides a reliable and long-lasting connection.
Can I use this fitting for gas lines?
This fitting is intended for water systems. Specific fittings and procedures are required for gas line installations.
Troubleshooting
Leak at the soldered joint
The joint was likely not heated sufficiently, the pipe/fitting was not clean, or flux was not applied correctly. The fitting will need to be removed (by heating and desoldering) and the process repeated with thorough cleaning and proper technique.
Threaded connection leaks
Ensure the mating threaded surfaces are clean. Use appropriate thread sealant tape (PTFE tape) or pipe dope on the male threads before connecting. Check that the male thread is fully engaged with the female thread.
Difficulty soldering
Ensure you are using the correct type of torch and gas, applying heat evenly to both the pipe and fitting, and have properly prepared the surfaces with flux. Use sufficient solder, allowing it to flow into the joint.
Pros and Cons
Pros
- Durable brass construction for long-lasting use.
- Provides a secure and reliable connection between copper and threaded pipes.
- Standard 1/2" BSP female thread for broad compatibility.
- Designed for permanent, leak-proof soldered joints.
Cons
- Requires soldering skills and equipment for installation.
- Not suitable for push-fit or compression plumbing systems.
- Limited to specific pipe sizes (15mm copper to 1/2" BSP thread).
Setup, Compatibility & Care
Setup:
- Ensure the 15mm copper pipe end is clean, de-burred, and free from oxidation.
- Apply flux to both the inside of the fitting's copper end and the outside of the copper pipe.
- Insert the copper pipe fully into the fitting's copper end.
- Heat the fitting evenly with a torch.
- Apply lead-free solder to the joint; it will be drawn into the gap by capillary action.
- Allow the joint to cool completely without disturbing it.
- Connect the 1/2" BSP threaded component to the fitting's female thread.
Compatibility:
- Primarily compatible with 15mm soft or half-hard copper pipe.
- Compatible with standard 1/2" BSP female threaded fittings and components.
- Requires lead-free solder suitable for potable water systems.
Care:
- Brass fittings are inherently corrosion-resistant. Normal maintenance involves ensuring connections remain tight and free from leaks.
- Avoid harsh abrasive cleaners on the external surfaces to maintain the finish. A damp cloth is usually sufficient for cleaning.