Laser Tools Radiator Drain Plug Tool - Cross Slot - 7967

This tool is specifically designed for plastic radiator drain plugs that feature a cross-slot design.

No, this tool is intended for plastic drain plugs only. Using it on metal plugs may cause damage to both the tool and the plug.

The dual drive options (17mm hex and 3/8" square) provide flexibility. The 17mm hex works with a standard spanner, while the 3/8" square drive allows for use with a ratchet and extension, which is helpful for reaching difficult-to-access plugs.

It is designed to engage the plug correctly and allow for controlled application of force, mirroring the method intended by the vehicle manufacturer, thereby reducing the risk of cracking or stripping the plastic plug.

You will need a 17mm spanner for the hex drive.

Yes, depending on which drive you choose to use, you will need either a 17mm spanner or a 3/8" drive ratchet and extension.

After each use, wipe the tool clean of any coolant or debris. Store it in a dry place to prevent rust or corrosion.

Ensure the tool's drive slots are fully engaged with the drain plug's cross slots. Check that the drain plug itself is not stripped or damaged. Verify you are using the correct size/type of plug for this tool.

Confirm you are using the correct drive method (spanner or ratchet). For tight plugs, use the 3/8" square drive with a ratchet and extension for better leverage and control. Ensure the ratchet is in the correct 'loosen' or 'tighten' direction.

Verify the drain plug is a plastic, cross-slot type. This tool is not designed for metal plugs or other plug designs. Check that no debris is obstructing the tool's engagement with the plug.