Kyocera Toner Cartridge - Magenta - TK-865M

The TK-865M magenta toner cartridge yields approximately 12,000 pages, based on ISO/IEC 19798 standards with 5% coverage.

This toner is specifically designed for the Kyocera TASKalfa 250ci and TASKalfa 300ci printers.

Genuine Kyocera toner is formulated with the correct particle size and composition to work optimally with your printer, ensuring superior print quality, reliability, and protecting printer components like the drum unit from damage.

Store the cartridge in its original, sealed packaging in a cool, dry place away from direct sunlight and extreme temperatures until you are ready to install it.

'Ultra-high capacity' refers to the cartridge's ability to print a large number of pages (12,000 in this case) before needing replacement, making it suitable for high-volume printing environments and reducing the cost per page.

While non-genuine toners may seem cheaper, they can lead to poor print quality, printer damage, and voided warranties. Kyocera strongly recommends using genuine toner for optimal performance and longevity of your TASKalfa printer.

Ensure the cartridge is correctly seated in its slot. Power cycle the printer (turn it off, wait 30 seconds, then turn it back on). Check for any protective seals that may have been left on the cartridge.

Verify that the correct toner (TK-865M) is installed. Shake the toner cartridge gently horizontally to redistribute the toner. Clean the printer's interior components as per the printer's maintenance guide. If the issue persists, the drum unit may need attention.

Ensure the cartridge was installed correctly. Some printers have a calibration process; check your printer's manual. If the printer consistently reports low toner well before the estimated page yield, contact customer support.