Best current price£22.99from eBay
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop 3x Bartoline Easipaste Ready Mixed All Wallcovering Adhesive Hanging Vinyl 2.5kg
Visit shop
B&Q£30.99Visit shop B&Q - 3X Easipaste Ready Mixed All Wallcovering Adhesive Hanging Vinyl 2.5Kg
Visit shop3 offers from £22.99 - £30.99
View price history by clicking the chart icon.
Bartoline Easipaste is a ready-mixed wallpaper adhesive designed for DIY enthusiasts and professional decorators tackling any wallpaper type, including vinyl, heavy embossed, and 'paste the wall' varieties. Its key benefit is the no-mixing, easy-spread formula that provides strong grab and allows for easy adjustment of wallpaper during application, simplifying the hanging process. A potential caveat is the need to prepare very porous surfaces beforehand to ensure optimal adhesion.
| Model Part Number | RW0920 |
|---|---|
| Brand | Bartoline |
No, Bartoline Easipaste is a ready-mixed formula, so no mixing or dilution is required. It is ready to use straight from the container.
Easipaste is suitable for all types of wallcoverings, including vinyl, blown vinyl, heavy embossed, washables, and 'paste the wall' wallcoverings.
Approximately one 10-meter roll of standard wallcovering, or half a roll of embossed or heavy embossed wallcovering.
Surfaces must be sound, dry, clean, and free from dust and grease. Gloss painted surfaces should be sanded. Very porous surfaces (like new plaster) should be sealed first with PVA or size.
Apply Easipaste evenly and generously directly onto the wall surface, making sure the pasted area is slightly wider than the wallpaper width.
Immediately remove any paste that comes into contact with the patterned side of the wallcovering using a clean, damp cloth.
Yes, store any leftover paste in its original, tightly sealed container in a cool, dry place. Ensure the lid is securely fastened.
Ensure the surface was properly prepared (clean, dry, sealed if porous). Check that enough paste was applied and that it was evenly distributed, especially at the edges. For heavy papers, ensure sufficient booking time was allowed.
Gently try to smooth out the wallpaper with a clean brush or roller towards the nearest edge. If the paste is still wet, you may be able to lift and reposition the paper. Ensure no excess paste was left on the patterned side, which can cause issues.
This indicates the 'easy slide' properties are working well. Ensure you are aligning seams accurately and apply gentle pressure to secure the paper. The strong grab will take hold as it dries.
Ensure the product has not dried out. If stored incorrectly, it may become lumpy. If the paste is simply thick, a little more pressure with a roller or brush will usually suffice. Ensure you are using a suitable applicator (e.g., a paste brush or roller).
Preparation:
Before applying Bartoline Easipaste, ensure all surfaces are sound, dry, clean, and free from dust, grease, and dampness. For surfaces previously painted with gloss paint, lightly sand them to create a better key for the adhesive. If you are applying wallpaper to very porous surfaces such as new plaster or unsealed drywall, it is crucial to seal them first using a PVA solution or wallpaper size. This prevents the porous surface from absorbing too much moisture from the paste, which can lead to poor adhesion.
Application:
To open the container, break the seal and lift the lid. Always refer to the specific instructions provided by your wallpaper manufacturer.
Immediately wipe away any adhesive that comes into contact with the patterned side of the wallcovering using a clean, damp cloth.
Care:
Store the adhesive in its original, tightly sealed container in a cool, dry place, away from extreme temperatures and direct sunlight. Keep out of reach of children and pets. Clean up any spills immediately with water. Once dry, the adhesive is permanent.
