Best current price£40.52from eBay
Shopping.co.uk recommended and popular offers
eBay£40.52Visit shop Mirka Abralon 125mm P600 Grit 20x HookNLoop Foam Fine Finishing Discs Pad
Visit shop2 offers from £40.52 - £44.26
View price history by clicking the chart icon.
Mirka Abralon foam discs are essential tools for professional body shops, woodworkers, and automotive enthusiasts looking to achieve a superior, uniform surface finish. These 125mm pads are engineered for fine sanding and surface preparation, utilizing a flexible foam backing that conforms to curves and contours to prevent over-sanding. While they provide excellent results on both flat and complex surfaces, users should note that the P600 grit is specifically for fine finishing, meaning it is not intended for heavy material removal or stripping deep scratches.
| Model Part Number | 8A23202061 |
|---|---|
| Brand | Abralon |
Yes, Abralon discs are designed to be used for both dry and wet sanding applications.
P600 is primarily used for fine finishing, intermediate sanding, and surface preparation before final painting or polishing.
Yes, they are excellent for smoothing out finishes between coats of paint or varnish.
Yes, if cleaned properly with water and allowed to dry, they can be reused for multiple sanding sessions.
While they attach to any standard 125mm hook-and-loop backing, using an interface pad can further increase the cushion effect on highly complex curves.
No, P600 is too fine for heavy rust or material removal; use a coarser grit for stripping, then refine with P600.
Ensure the hook-and-loop interface is free of dust and debris. If the backing material is worn, replace the backing pad on your sander.
Reduce sanding pressure and ensure you are using consistent, fluid motions. If wet sanding, ensure you are using enough water to flush the slurry away.
Check that the disc is perfectly centered on the backing pad and that the sander is being held flat against the surface.
To set up these discs, simply align the hook-and-loop backing of the Abralon disc with your 125mm sanding tool's backing pad and press firmly to ensure a secure grip. Ensure your tool is set to a moderate speed to prevent heat buildup on the foam layer. Regarding compatibility, these discs work best with random orbital sanders that feature integrated dust extraction, though they are equally effective for hand-sanding applications using a compatible soft interface pad. To care for your Abralon discs, rinse them with water after use to remove trapped dust and debris, then allow them to air dry completely before storing them in a cool, dry place away from direct sunlight.
