Tamiya RC Astute 2022 Body Parts Set - 51692
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Tamiya 51692 RC Astute 2022 Body Parts Set is designed for Tamiya RC car enthusiasts looking to maintain or customize their TD2 chassis models. This clear polycarbonate body set provides a direct replacement for worn or damaged original parts, ensuring your model retains its authentic look and performance. While it offers a perfect fit for the Astute 2022, it is specifically intended for the TD2 chassis, limiting its use with other Tamiya models.
All features
| Model Part Number | 51692 |
|---|---|
| Brand | Tamiya |
Extended Product Information
FAQs
What chassis is this body set compatible with?
This body set is specifically designed for the Tamiya TD2 chassis and is a direct replacement for the Astute 2022 model.
Does the body come painted?
No, the body is supplied clear and unpainted. You will need to purchase and apply your own polycarbonate-specific paints and decals.
What material is the body made from?
The body is made from 1mm thick polycarbonate, a durable and impact-resistant material commonly used for RC car bodies.
Can I use this body on a different Tamiya chassis?
This body is optimized for the TD2 chassis. While minor modifications might allow it to fit other chassis, it is not guaranteed and may affect performance or appearance.
How do I prepare the body for painting?
Clean the inside of the clear body thoroughly with a mild cleaner to remove any manufacturing residues or fingerprints. Mask off windows and then apply paint from the inside.
What tools are needed to install this body set?
You will typically need a hobby knife or body reamer for trimming, masking tape and liquid mask for painting, polycarbonate-specific paints, decals, and body clips for mounting.
How should I clean the painted body?
Use a soft, damp cloth to wipe down the exterior. Avoid using solvents or abrasive cleaners that could damage the paint finish.
Troubleshooting
Body does not fit the TD2 chassis correctly.
Ensure you are using the correct body clips and that the body is aligned properly with the chassis mounting points. Verify that no internal paint or modifications are obstructing the fit.
Paint is peeling or flaking off.
Ensure the inside of the polycarbonate body was thoroughly cleaned and free of oils or residues before painting. Use paints specifically designed for polycarbonate and apply them in light coats. Check that the paint is fully cured before handling.
Cracks appearing in the body after a minor impact.
While polycarbonate is durable, extreme impacts can cause cracks. Ensure paint is applied in thin, even coats, as thick coats can make the body more brittle. For minor cracks, specialized polycarbonate repair glue can be used.
Difficulty trimming the body.
Use a sharp hobby knife or a dedicated body reamer. Score the line lightly multiple times rather than trying to cut through in one pass. This provides a cleaner, more controlled cut.
Pros and Cons
Pros
- Ensures precise fit and original appearance for the Astute 2022 model.
- Durable 1mm polycarbonate construction offers good impact resistance.
- Clear finish allows for complete customization through painting.
- Designed as a direct replacement, simplifying installation.
- Maintains the integrity and performance of the TD2 chassis.
Cons
- Limited compatibility, primarily for the TD2 chassis and Astute 2022.
- Requires separate painting and decal application.
- Polycarbonate bodies can be susceptible to cracking under severe impacts.
- Does not include paint or tools for assembly/customization.
Setup, Compatibility & Care Instructions
Setup:
- Carefully remove the clear body from its packaging.
- Mask off the windows and any areas you do not wish to paint using masking tape and liquid mask.
- Apply your chosen polycarbonate paints from the inside of the body, following the paint manufacturer's instructions. Allow adequate drying time between coats.
- Once painting is complete and fully dry, remove the masking.
- Apply any included or purchased decals according to your preference.
- Trim the body if necessary using a body reamer or sharp hobby knife, following any trim lines indicated on the body or instructions.
- Attach the body to your Tamiya TD2 chassis using the appropriate body clips.
Compatibility:
- Primary Compatibility: Tamiya TD2 Chassis, specifically as a replacement for the Astute 2022 body.
- Important Note: This set is *not* designed for other Tamiya chassis or models unless explicitly stated by Tamiya.
Care:
- Clean the body with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the paint or polycarbonate.
- Store the RC car away from direct sunlight and extreme temperatures to prevent fading or warping of the body.