Sealey Body & Chassis/Frame Straightener Kit - DZRE22

The kit is designed for straightening bent chassis and body damage, particularly effective on frame rails and structural components affected by impacts.

Refer to the product manual for specific contents. Typically, hydraulic fluid may need to be purchased separately.

The pump is designed for low manual effort, allowing users to achieve significant hydraulic force with consistent pumping action.

This kit is intended for heavy-duty repairs involving significant structural deformation. It is generally not suitable for minor cosmetic dents.

The variable position upright allows for precise angling of the pulling force, enabling technicians to address bends from multiple directions and optimize the straightening process.

Basic assembly is required to connect the main components such as the ram, pump, and upright to the base plate. Detailed instructions are provided.

Specific dimensions and weight are not provided in the product description but it is classified as a heavy-duty tool, indicating a substantial size and weight.

Check the hydraulic fluid level. Ensure the release valve is fully closed for extension and fully open for retraction. Inspect for any blockages or air in the system; bleed if necessary.

Ensure the hook is securely attached to a solid part of the frame. Clean any debris from both the hook and the frame contact point. Use additional securing points if necessary.

Clean any debris from the adjustment mechanism. Apply a suitable lubricant to the pivot points. Ensure no excessive pressure is on the upright when attempting to adjust.

Verify that the release valve on the hydraulic pump is fully closed. Ensure the pump is functioning correctly and that there are no leaks in the hydraulic system. Check fluid levels.