Best current price£16.99from Wowcher.co.uk
Shopping.co.uk recommended and popular offers
Wowcher.co.uk£16.99Visit shop Morden Furniture World Ltd Solar-Powered Drip Irrigation Kit For Up To 10 Plants | Wowcher
Visit shop1 offer from £16.99
View price history by clicking the chart icon.
Designed for balcony, patio, and small garden enthusiasts, this solar-powered drip irrigation kit is the ideal solution for those seeking automated, water-efficient plant care without the need for external power or a mains water tap. By leveraging a high-capacity rechargeable battery and a flexible solar panel, it provides consistent hydration for up to 10 potted plants with minimal oversight; however, users should note that the system requires an independent reservoir of water to function, making it best suited for contained areas rather than large-scale landscape irrigation.
| Colour | Black |
|---|---|
| Model Part Number | 0099641438198 |
| Brand | Living and Home |
No, this system is specifically designed to draw water from an independent reservoir, such as a water butt or a large bucket.
The kit includes components for up to 10 individual plants.
Yes, the high-capacity internal battery stores enough energy to keep the system running for several days, even if solar charging is limited during cloudy periods.
The pump operates very quietly, making it suitable for peaceful balcony or patio environments.
While it is designed for outdoor use, you can use it indoors provided you have a way to place the solar panel where it can receive sunlight to charge the battery.
An IP65 rating means the unit is protected against dust ingress and low-pressure water jets, making it safe for outdoor use in rainy conditions.
Verify that the solar panel has received sufficient sunlight to charge the internal battery and check if the selected program was saved correctly.
Check the filter for clogs and ensure the 10m hose is not kinked or pinched. Verify that the water level in the reservoir has not dropped below the intake point.
Ensure that the hose is fully seated over the T-connectors. If a leak persists, trim a small piece of the hose end to provide a fresh, snug fit.
To set up your system, start by placing your water reservoir in a stable location. Cut the included 10m hose to the required lengths for each plant using the T-connectors to link the lines together. Ensure the filter is attached to the intake hose before dropping it into your water source to prevent debris from clogging the pump.
Maintenance Tips:
