Best current price£56.40from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£56.40Visit shop R-TECH 857019 SAC305 Solder 2% L1 Flux
Visit shop24 offers from £56.40 - £148.80
View price history by clicking the chart icon.
The R-TECH 857019 SAC305 Solder 2% L1 Flux is designed for professional electronics technicians and hobbyists who require high-quality, reliable solder joints. Its key benefit is the combination of high-purity lead-free alloy with a fast-flowing, no-clean flux core that speeds up the soldering process and reduces cleanup. A potential consideration is its 1.2mm diameter, which may be too large for very fine-pitch components, requiring users to select appropriate tools for micro-soldering tasks. This solder wire offers excellent joint strength and reliability due to its silver content, and the 'no clean' feature simplifies post-soldering steps.
| Model Part Number | 857019 |
|---|---|
| Brand | R-TECH |
SAC305 refers to the alloy composition: 3% Silver (Ag), 0.5% Copper (Cu), and the remainder Tin (Sn). This is a common high-reliability lead-free solder alloy.
Yes, while designed for professional use, its 'no clean' feature and good flow make it suitable for hobbyists who want reliable, high-quality solder joints.
The 'no clean' formulation means that for most applications, the transparent residues are non-corrosive and do not need removal. However, for critical applications or where visual inspection is paramount, cleaning might still be recommended.
Leaded solder (e.g., 60/40 Tin/Lead) has a lower melting point and is generally easier to work with for beginners. Lead-free solder like SAC305 requires higher temperatures and can be slightly more challenging to achieve good joints without proper technique.
Halides are activators in the flux. A low halide content (<0.5% in this case) ensures that the flux is less aggressive and the residues are more stable and less likely to cause corrosion over time.
You can use it with a standard soldering iron, but it must be rated for lead-free temperatures (typically higher than leaded solder irons). Ensure your iron has good temperature control and can reach and maintain temperatures around 350°C.
This reel contains 250 grams of solder wire.
Increase soldering iron temperature slightly, ensure iron tip is clean and tinned, and verify the workpiece is properly heated. Ensure the solder wire is not oxidized.
This often indicates insufficient heating or overheating. Ensure the correct temperature is used and heat the joint evenly. Avoid excessive agitation while the solder solidifies.
Ensure the soldering iron tip is clean and properly tinned. Reduce the temperature slightly if it's too high, or use a higher quality flux core if using an older wire.
Use a finer diameter solder wire for very small pads or components. Apply less solder per joint. Ensure adequate flux is present but not excessive. Use desoldering braid or a desoldering pump to remove excess solder.
Setup: Ensure you are working in a well-ventilated area. Use a soldering iron with adjustable temperature control, set to the recommended temperature range for SAC305 solder (typically between 315°C and 370°C or 600°F and 700°F). Prepare the surfaces to be soldered by cleaning them thoroughly.
Compatibility: This lead-free solder is compatible with most common electronic components and PCB finishes. It is designed for use with standard soldering irons and equipment suitable for lead-free soldering.
Care: Store the solder wire in its original packaging in a cool, dry place to prevent oxidation and contamination of the flux core. After use, wipe the soldering iron tip clean and tin it immediately to protect the tip from oxidation. Keep the reel clean and free from dust.
