Best current price£40.58from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£40.58Visit shop Finder 78.12.1.230.1200 Rail PSU 12V DC 1.25A 12W 110-240V AC inpu...
Visit shop15 offers from £40.58 - £326.41
View price history by clicking the chart icon.
The Finder 78.60.1.230.2402 is a 60W DIN rail-mounted power supply unit designed for industrial applications, offering a stable 24V DC output. It's ideal for automation systems and control panels requiring reliable power. A key benefit is its high efficiency and compact, DIN rail-mountable design. However, the output voltage is only adjustable within a limited range, which might be a constraint for some specific voltage requirements.
| Model Part Number | 78.60.1.230.2402 |
|---|---|
| Brand | Finder |
The Finder 78.60.1.230.2402 provides a maximum output current of 2.8 A.
Yes, this power supply is suitable for Safety Extra Low Voltage (SELV) applications.
The output voltage can be adjusted between 24V and 28V DC using the potentiometer located on the unit, typically requiring a small screwdriver.
The unit can operate in temperatures ranging from -20 °C to 70 °C.
Yes, it includes internal protection against short circuits at the output.
It accepts universal input voltage, ranging from 110 to 240V AC or 220V DC.
It is designed for mounting on a standard 35mm DIN rail (EN 60715).
Verify that the input voltage is correctly connected and within the specified range (110-240V AC or 220V DC). Check all wiring connections for proper contact. Ensure the circuit breaker or fuse protecting the input is not tripped.
Check the output voltage adjustment potentiometer. Ensure the load connected does not exceed the unit's maximum output current (2.8A) or power (60W), as this can cause voltage sag. Verify input voltage is stable.
The unit may be overheating or experiencing a short circuit. Allow the unit to cool down. Check the output for any short circuits. Ensure proper ventilation around the unit and that ambient temperature is within the operating range (-20 to 70 °C).
Inspect input and output wiring for loose connections or intermittent contact. Ensure the DIN rail mounting is secure. Check if the input power source is stable and free from fluctuations.
Setup: The Finder 78.60.1.230.2402 is designed for easy installation on a standard 35mm DIN rail (EN 60715). Ensure the unit is securely fastened to the rail. Connect the input voltage (110-240V AC or 220V DC) to the designated terminals. Connect your 24V DC load to the output terminals, observing correct polarity. The output voltage can be adjusted slightly between 24-28V DC using a screwdriver on the adjustment potentiometer.
Compatibility: This power supply is compatible with most industrial control systems requiring a 24V DC power source within its 60W capacity. It operates with standard AC input frequencies of 50/60 Hz. Ensure your input voltage source matches the specified input range (110-240V AC / 220V DC).
Care: Maintain a clean environment around the unit to prevent dust accumulation, which could impede ventilation. The IP20 rating indicates protection against solid objects greater than 12.5mm but no protection against water; therefore, it should be installed in a dry, protected enclosure. Periodically check connections for tightness. Do not attempt to open or repair the unit; it contains no user-serviceable parts. If the unit requires servicing, it should be replaced.
