Berger Wood & Metal Quick Dry Gloss Paint - Brilliant White

The paint is touch dry in approximately one hour. Recoat after 4 hours.

Yes, it is suitable for both interior and exterior wood and metal surfaces.

It is suitable for wood and metal surfaces.

It is recommended to use a primer, especially on bare wood or metal surfaces, for better adhesion and durability.

Clean brushes and rollers immediately after use with water.

Use a damp cloth and mild detergent. Avoid abrasive cleaners.

Coverage depends on the surface and application method, but typically, 1 liter covers approximately 12 square meters.

Ensure the surface is clean and free of contaminants. Check the temperature and humidity levels, as these can affect drying times. Ensure adequate ventilation.

Ensure proper surface preparation. Apply thin, even coats and avoid over-brushing. If using a roller, use a high-quality roller for a smoother finish.

Make sure the surface is properly prepared, including cleaning and sanding. Ensure proper adhesion by using a suitable primer if necessary. Avoid applying too thick a coat.