Best current price£26.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£26.00Visit shop D-C-Fix Shabby Wood Planks Grey Sticky Back Plastic Vinyl Wrap Film 67.5Cm X 5M
Visit shop3 offers from £26.00
View price history by clicking the chart icon.
This d-c-fix Shabby Wood Planks Grey Sticky Back Vinyl Film is ideal for DIY enthusiasts and renters looking to quickly and affordably update interior spaces. Its key benefit is providing a stylish, new look to surfaces like kitchen doors and worktops with easy application. A caveat is the need to use heat protection for hot pans and seal wet areas to ensure longevity. This high-quality, German-manufactured vinyl film offers a self-adhesive solution that is repositionable during application and removable, making it suitable for temporary decor.
| Brand | d-c-fix |
|---|
Yes, it can be applied to smooth, painted surfaces. However, ensure the paint is well-adhered and the surface is clean and dry. Removing the film may potentially damage delicate paint finishes.
While it is wipe-clean, it is not designed for constant submersion or direct water spray. It's best to seal edges thoroughly with silicone around wet areas like sinks and hobs, but prolonged exposure to water in a shower is not recommended.
Gently heat the film with a hairdryer on a low setting, then slowly peel it back. If residue remains, it can usually be cleaned with a mild adhesive remover.
The film measures 67.5cm in width and comes in a roll of 5 meters in length.
It's generally not recommended to apply directly over wallpaper, especially if it is textured or not securely adhered, as it may not stick properly and could damage the wallpaper upon removal.
The film is heat resistant up to 70°C. It is essential to use protective mats or trivets for hot pans and dishes.
Gently peel back the affected section of the film and re-apply, smoothing from the center outwards with a soft cloth or squeegee. For small bubbles, you can sometimes prick them with a fine needle and smooth them down.
Ensure the surface is thoroughly cleaned, dried, and free from dust or grease. For some surfaces, a light application of a suitable primer might improve adhesion. Ensure the temperature is suitable for application (avoiding extreme cold or heat).
Ensure the surface edges are smooth and clean. Re-apply the film, pressing firmly on the edges. For added security, especially in high-moisture or high-traffic areas, consider applying a thin bead of silicone sealant along the edges after application.
Use a sharp craft knife or precision cutting tool and a ruler or cutting mat for best results. Cut slowly and carefully, allowing for any curves or complex shapes.
Setup: Ensure the surface you wish to cover is clean, dry, and smooth. Remove any dust, grease, or old adhesive. Carefully peel back a small section of the backing paper and align the film with the edge of the surface. Slowly smooth the film down, working from the center outwards to avoid air bubbles. If needed, peel back and re-apply. Trim any excess with a sharp craft knife.
Compatibility: Suitable for smooth, clean, and non-porous surfaces such as laminate, metal, painted wood, glass, and plastic. Avoid applying to rough, textured, or uneven surfaces.
Care: Clean regularly with a soft, damp cloth and mild detergent if necessary. Avoid abrasive cleaners or scouring pads. For areas prone to heat (kitchen worktops), always use mats or trivets for hot items. Seal edges around wet areas like sinks and hobs with silicone sealant to prevent moisture damage.
