Best current price£7.70from Autodoc
Shopping.co.uk recommended and popular offers
Autodoc£7.70Visit shop ELRING Gaskets OPEL,FIAT,PEUGEOT 504.581 1608816780,312144,1608816780 Shaft Seal, differential 312144,9403121440,1608816780,312144
Visit shop11 offers from £7.70 - £16.46
View price history by clicking the chart icon.
1 offer from £9.99
View price history by clicking the chart icon.
This guide is for owners and mechanics of specific Citroën Berlingo models (2005-2021) needing a left-side differential shaft seal. The key benefit is ensuring a reliable seal to prevent fluid leaks and protect the drivetrain, with a caveat that careful measurement is required due to potential variations. This BERU Shaft Seal by Elring, part number 504.581, is manufactured to OE-quality standards for a precise fit and dependable performance.
| Model Part Number | 504.581 |
|---|---|
| Brand | Elring |
The main function is to prevent differential fluid from leaking out of the axle housing where the driveshaft enters, and to keep contaminants out.
OE-quality means the part is manufactured to meet or exceed the standards set by the original equipment manufacturer for fit, performance, and durability.
No, this specific part number (504.581) is designed exclusively for the *left* side differential position.
This seal is compatible with specific Citroën Berlingo models manufactured between 2005 and 2021, including variants like the Multispace, Berlingo (ER_, EC_), and Berlingo / Berlingo First Box Body/MPV.
It's recommended to check differential fluid levels as part of your vehicle's regular maintenance schedule, typically during oil changes or as specified in your owner's manual.
A leaking seal can lead to a low differential fluid level, causing increased wear, overheating, and potential damage to the gears and bearings within the differential.
Re-check installation for proper seating. Ensure the mating surface on the shaft and housing is perfectly clean and undamaged. Verify the correct seal part number was used and that no variations were overlooked during the compatibility check.
Ensure you are using the correct seal and that the shaft and housing bore are clean. Use a proper seal driver tool to avoid damaging the seal during installation. Do not force the seal; it should be pressed in evenly.
This could indicate low differential fluid level due to the leak, or potential damage to differential components caused by the leak prior to replacement. Ensure the differential is filled to the correct level with the specified fluid. If noise persists, further inspection of the differential internals may be necessary.
Compatibility Check:
Before purchasing and installation, verify that your vehicle is listed within the compatible Make, Model, and Year range: Citroën Berlingo Multispace (B9), Berlingo (ER_, EC_), Berlingo / Berlingo First Box Body/MPV (M_) from 2005 to 2021. Pay close attention to the specific engine variants and body types mentioned, and *importantly*, cross-reference the physical measurements and dimensions of your existing seal with the specifications if possible, as variations can exist even within the same model line.
Installation:
Installation of a differential shaft seal is a mechanical procedure that typically requires the removal of the axle shaft and potentially other drivetrain components. It is highly recommended that this part be installed by a qualified mechanic or a technician experienced with automotive drivetrain repairs. Ensure the mating surfaces on the differential housing and the shaft are clean and free of debris before fitting the new seal. Lubricate the seal lip lightly with appropriate differential fluid or grease before installation to prevent damage.
Care:
Once installed, the primary care required is regular monitoring of differential fluid levels during routine vehicle maintenance. Look for any signs of oil leaks around the seal area. Adhering to the manufacturer's recommended fluid change intervals will also help maintain the longevity of the seal and the differential.
