BBB Tubeless Rim Tape 18mm x 10m
Best current price£9.99from Tredz
Best offers
Shopping.co.uk recommended and popular offers
Tredz£9.99Visit shop Bbb Tubeless Rimtape 10M
Visit shopTredz£9.99Visit shop All Offers
4 offers from £9.99 - £10.00
View price history by clicking the chart icon.
Bbb Cycling Unisex Yellow Bbb Tubeless Rimtape - 10M£4.99 delivery£10.00Visit shop →
Bbb Cycling Unisex Yellow Bbb Tubeless Rimtape - 10M£4.99 delivery£10.00Visit shop →
Product Information
Full details
The BBB Tubeless Rim Tape is designed for cyclists who want to create a reliable, airtight seal for their tubeless tires on both MTB and road wheels. Its strong adhesive ensures a secure fit, but proper application is crucial for optimal performance, as incorrect installation can lead to leaks.
All features
| Model Part Number | 2977345118 |
|---|---|
| Brand | BBB |
Extended Product Information
FAQs
What is the difference between the various widths of BBB Tubeless Rim Tape?
The widths (18, 22, 25, 28, 31, 34 mm) correspond to the internal width of your wheel rim. Choosing a tape that is slightly wider than your rim's internal width ensures complete coverage of the spoke bed and creates a better seal.
Can this rim tape be used on non-tubeless rims?
This tape is specifically designed for tubeless setups. While it might temporarily hold air on some rims, it is not designed to create a permanent seal for tubeless tires on non-tubeless-ready rims.
How much tape is on one roll?
Each roll of BBB Tubeless Rim Tape contains 10 meters of tape.
How long does the tape typically last?
With proper installation and care, the tubeless rim tape can last for a considerable time, often years. It is usually replaced when tires are changed or if leaks develop around the rim edge.
What tools are recommended for applying the tape?
While not strictly required, a clean, smooth tool like a wooden dowel, the back of a spoon, or a plastic tire lever can help press the tape firmly into the rim bed and ensure good adhesion.
Will the yellow color be visible through my rim?
The tape is typically applied to the inside of the rim. The bright yellow color is intended to aid in installation visibility and is not usually visible once the tire is mounted.
Can I use this tape with tubeless sealant?
Yes, this tape is designed to work in conjunction with tubeless sealant to ensure an airtight seal and to seal small punctures.
Troubleshooting
Tape not adhering properly
Ensure the rim surface is completely clean, dry, and free of oils or residue before application. Press the tape firmly into place, especially along the edges.
Air leaks around the valve stem
Ensure the valve stem is seated correctly and the valve nut is snug. Double-check that the tape was pierced cleanly and sealed around the base of the valve.
Bubbles or wrinkles in the tape
Attempt to smooth them out by firmly pressing the tape with a rounded tool. If severe, it may be necessary to remove and reapply the tape.
Tape lifting at the rim edge
Carefully re-adhere the lifting edge, ensuring the rim surface is clean. Sometimes applying gentle heat with a hairdryer can help the adhesive conform better, but use caution not to overheat.
Pros and Cons
Pros
- Provides a reliable airtight seal for tubeless setups.
- Available in multiple widths to fit various rim sizes.
- Sufficient tape length (10 meters) for multiple applications.
- Suitable for both MTB and road tubeless wheels.
- Bright color assists in accurate installation.
Cons
- Requires careful application for best results.
- Adhesive may be difficult to remove cleanly after a long period.
- Not suitable for tubeless-ready (TLR) rims that require specific rim strips.
- Weight varies by width, which might be a minor consideration for weight-conscious riders.
Setup, Compatibility & Care
Setup:
- Clean the inside of the rim thoroughly with a degreaser and ensure it is completely dry.
- Starting opposite the valve hole, begin applying the tape, pressing it firmly into the rim channel.
- Carefully work your way around the rim, ensuring the tape lies flat and smooth without any wrinkles or bubbles.
- Overlap the tape by approximately 4-6 inches (10-15 cm) where it meets the starting point, ideally near the valve hole.
- Cut the tape cleanly with a sharp blade.
- Use a tool like a wooden dowel or the back of a spoon to press the tape firmly into the rim bed and around the edges, ensuring maximum adhesion.
- Carefully pierce the tape at the valve hole with a sharp object (like an awl or the valve stem itself).
Compatibility:
- Compatible with most MTB and road tubeless wheel rims.
- Suitable for wheel sizes ranging from 12.5 inches to 29 inches.
- Select a tape width that is slightly wider than the internal width of your rim for best coverage.
Care:
- The tape is designed for long-term use. Clean the rim bed if you need to replace the tape.
- Avoid using harsh solvents that could degrade the adhesive. A mild alcohol wipe is generally sufficient for cleaning.