Zipbolt Ultimate Compact Fixing Kit - QTSCL18.100UFKIT
Best current price£59.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£59.99Visit shop B&Q - Fixing Kit For Solid Compact Laminate Worktops
Visit shopB&Q£59.99Visit shop All Offers
2 offers from £59.99 - £71.42
View price history by clicking the chart icon.
Travis PerkinsZipbolt Ultimate Compact Fixing Kit for Solid Compact Laminate Worktops
£30.00 delivery
£71.42
Visit shop
Product Information
Full details
The Zipbolt Ultimate Compact Fixing Kit is designed for professional installers and dedicated DIY enthusiasts working specifically with solid compact laminate worktops. Its primary benefit is providing a robust, all-in-one system for achieving clean, flush, and high-tension joints in dense materials where traditional fixings often fail, though users should note that the fast-setting epoxy requires quick, precise application to ensure optimal results.
All features
| Model Part Number | QTSCL18.100UFKIT |
|---|---|
| Brand | Zipbolt |
Extended Product Information
FAQs
Is this kit suitable for wood worktops?
This kit is specifically engineered for solid compact laminate worktops, which have different density and mounting requirements than standard timber.
Can I reuse the Zipbolt connectors?
The connectors are designed for permanent installation once the epoxy has cured, so they are not intended for reuse.
How long should I wait before using the countertop?
While the epoxy sets in 5 minutes, it is recommended to wait until the adhesive has fully cured according to the package instructions before applying heavy weight to the joint.
What if I run out of alcohol wipes?
You can use a high-percentage isopropyl alcohol with a clean microfiber cloth to ensure the joint surfaces are free of contaminants.
Does the kit include a drill?
No, the kit provides the driver bit and installation hardware, but you must provide your own power drill or impact driver.
Troubleshooting
Joint not pulling tight
Verify that the brass inserts are fully seated and that the connector is properly hooked into the housing.
Epoxy setting too quickly
Work in smaller sections or prepare your alignment tools before applying the resin to the joint surfaces.
Rough edge after cutting
Ensure you are using the specific Zipblades provided and maintain a steady, consistent feed rate through the material.
Pros and Cons
Pros
- Comprehensive all-in-one kit removes the need for sourcing individual components
- Connectors designed specifically for the unique challenges of solid compact laminate
- Fast-curing epoxy reduces downtime during installation
- Includes precision sanding and cleaning tools for a professional finish
Cons
- Fast-setting epoxy leaves little margin for error during application
- Requires specific knowledge of compact laminate handling to avoid surface damage
- Limited to single join operations per kit contents
Setup, Compatibility & Care
To begin installation, ensure the worktop edges are squared and clean. Use the alcohol wipes provided to remove any dust or oils from the joint faces, as these can interfere with the Zipbond epoxy. Insert the brass inserts into the pre-drilled holes, then position the Zipbolt connectors. Apply the epoxy evenly before drawing the joint together with the driver bit. Once the joint is secure, use the included sanding discs and pads to smooth any excess material. Keep the kit in a cool, dry place to prevent the epoxy from prematurely degrading, and always cap the adhesive immediately after use.