D-C-Fix Self-Adhesive Vinyl Film - Walnut Medium 90cm x 3m

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£23.97from B&Q

All Offers

2 offers from £23.97 - £25.99

View price history by clicking the chart icon.

B&QB&Q - Walnut Medium 90Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£23.97
Visit shop
Robert Dyasd-c-fix Walnut Self-adhesive Vinyl Wrap - Brown - 90cm x 3m
£2.95 delivery
£25.99
Visit shop

Product Information

Full details

This D-C-Fix self-adhesive vinyl film, in a Walnut Medium finish, is designed for homeowners and renters looking to refresh surfaces like kitchen countertops and furniture on a budget. Its key benefit is the ability to provide a new, realistic woodgrain look without the cost and effort of replacement. A potential caveat is the need for careful sealing around wet areas and the 70°C heat resistance limit. The vinyl is easy to apply, repositionable, and fully removable, offering a practical solution for quick home makeovers.

All features

Model Part Number200-5200-3
Brandd-c-fix

Extended Product Information

FAQs

Is this product suitable for outdoor use?

This vinyl film is designed for indoor use on furniture and surfaces. Outdoor exposure to UV rays and weather can degrade the material and affect its appearance and adhesion.

How do I clean the vinyl film?

The surface is wipe-clean. Use a damp cloth with mild soap and water. Avoid abrasive cleaners or scouring pads, which can scratch the surface.

Can I apply this over existing wallpaper or textured surfaces?

For best results, apply to smooth, flat surfaces. Applying over textured surfaces or wallpaper may result in an uneven finish and poor adhesion. The surface should be prepped to be smooth.

What is the heat resistance of the D-C-Fix vinyl?

The film is heat resistant up to 70°C (158°F). It is not recommended to place hot pans directly onto the surface; always use heat-resistant mats or trivets.

Will this damage my countertops if I remove it?

The film is designed to be removable, especially with the aid of heat from a hairdryer. However, adhesion strength can vary depending on the original surface and how long the film has been applied. Always test in an inconspicuous area first if concerned, particularly on delicate finishes.

Is this product safe for use in kitchens where food is prepared?

Yes, the material is phthalate-free and made in Germany. However, it is recommended to use cutting boards for food preparation and to wipe up spills immediately to avoid staining.

What does 'professionally cut from an original master roll' mean?

This means the vinyl is not sold in its original D-C-Fix retail packaging but is cut to specific lengths from a larger master roll by a third party (Create Your World). This allows for custom sizing not typically found in stores, ensuring you receive a continuous length of material.

Troubleshooting

Air bubbles or creases during application

Gently lift the affected section of the film and re-apply, smoothing with a felt edge smoother. If bubbles are small and persistent, a pinprick can release trapped air. For larger areas, applying with a light water mist on the surface can aid repositioning.

Film not sticking well

Ensure the surface is clean, dry, and free of dust or grease. For difficult surfaces, a light application of primer might be necessary, but always test first. Ensure you have removed all protective backing paper.

Difficulty applying to curved edges

Use a hairdryer on a low heat setting to gently warm and soften the vinyl. This makes it more pliable and easier to stretch and conform to curves. Work slowly and smooth as you go.

Water seeping under edges

This is common around sinks and hobs. Apply a thin bead of silicone sealant around the edges after application to create a waterproof barrier and prevent lifting.

Difficulty removing the film

Gently warm the film with a hairdryer on a low setting. The heat softens the adhesive, making removal easier. Peel slowly and steadily.

Pros and Cons

Pros

  • Budget-friendly alternative to replacing surfaces.
  • Easy DIY application with repositionable adhesive.
  • Removable, making it suitable for rental properties.
  • Realistic and durable finish.
  • Enhances the look of various furniture and countertops.

Cons

  • Requires sealing around sinks and hobs to prevent water damage.
  • Limited heat resistance (70°C) means hot pans need to be placed on protectors.
  • Not a factory-sealed retail roll, professionally cut and repackaged.
  • May require careful application to avoid air bubbles and creases.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and smooth. Remove any grease or dust.
  2. Measure and cut the vinyl film using the grid on the reverse for accuracy. Allow for a slight overlap.
  3. Peel back a small section of the backing paper.
  4. Carefully position and apply the film, smoothing out air bubbles with a felt edge smoother as you go. For large surfaces, spraying a light mist of water on the *shiny* surface (not the adhesive side) can help the film glide into position, minimizing creases and allowing for repositioning.
  5. Use a utility cutter for precise trimming of edges.
  6. For curved edges, gently warm the film with a hairdryer on a low setting to make it more pliable.

Compatibility:

  • Ideal for flat, smooth surfaces such as countertops, tabletops, furniture, cabinet doors, and walls.
  • Ensure surfaces are free from imperfections that could show through the film.

Care:

  • Wipe clean with a damp cloth and mild detergent. Wipe up spills immediately to prevent staining.
  • Heat resistant up to 70°C. Use worktop savers for hot pans and cutting boards for food preparation.
  • Seal edges around sinks and hobs with a silicone sealant to prevent water ingress, which can lift the vinyl.

Price History

DatePrice
Visit shop