Oase AquaOxy Aerator Bar Airstone - 60cm

The primary benefit is significantly increasing the dissolved oxygen levels in your pond or aquarium water, which is vital for the health of fish and other aquatic life.

This 60cm D Ring aerator bar is compatible only with the Oase AquaOxy 5000 and 7500 models manufactured in 2022.

The aerator bar comes with a threaded airline connector that accepts standard airline tubing with an 8mm or 10mm internal diameter. Connect the included 5m of tubing to this connector and then to your AquaOxy pump.

It is recommended to clean the aerator bar periodically, perhaps every few months, or whenever you notice a reduction in bubble output. Cleaning typically involves rinsing it under clean water.

While the product description focuses on ponds and general aquariums, enhanced oxygenation is beneficial in many aquatic environments. However, always ensure materials are suitable for specific water conditions.

The aerator bar is 60cm in diameter, with dimensions of 25mm (height) x 625mm (diameter).

Check that the AquaOxy pump is switched on and functioning. Ensure the airline tubing is securely connected to both the aerator bar and the pump. Inspect the airline tubing for any kinks or blockages. Verify that you are using a compatible 2022 AquaOxy model.

The aerator bar might have a partial blockage. Gently clean the surface of the aerator bar with a soft brush or by rinsing it in clean water. Ensure the aerator bar is fully submerged and oriented correctly.

Ensure the airline tubing is inserted fully into the threaded connector. If the tubing is old or stiff, it might not create a tight seal; consider replacing the tubing. Ensure the connector itself is not damaged.