Universal Fit Sanding Belt - 80 Grit - Pack of 3
Best current price£10.81from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£10.81Visit shop B&Q - 80 Grit Sanding Belt (W)76mm (L)457mmPack Of 3
Visit shopB&Q£10.81Visit shop One Offer
1 offer from £10.81
View price history by clicking the chart icon.
Product Information
Full details
This pack of three 80-grit sanding belts is designed for DIY enthusiasts and professionals tackling a variety of sanding tasks across most materials. The key benefit is their universal fit for 76 x 457mm belt sanders, offering a cost-effective solution for common projects. A caveat to note is that 80 grit is a medium coarseness, best suited for material removal and shaping rather than fine finishing.
All features
| Brand | Universal Fit |
|---|
Extended Product Information
FAQs
What does '80 grit' mean?
Grit refers to the coarseness of the abrasive material. A lower grit number, like 80, indicates a coarser grit, suitable for aggressive material removal and shaping. Higher grit numbers indicate finer abrasives for smoother finishes.
Can I use these belts for fine finishing?
No, 80-grit belts are considered medium-coarse. For fine finishing, you would need to use belts with much higher grit numbers (e.g., 120, 180, 220, or higher).
What materials can I sand with these belts?
These belts are suitable for a variety of materials including wood, metal, and plastics, making them versatile for many projects.
How do I know if my belt sander uses this size belt?
Check the specifications or manual for your belt sander. This belt is designed for models that require 76 x 457mm (3 x 18 inch) belts.
How often should I replace the sanding belt?
Sanding belts are consumables. Replace them when you notice a significant decrease in sanding effectiveness, visible wear like tears or glazing, or if they start to slip. This depends on the intensity and duration of use.
Are these belts directional?
No, these sanding belts are not directional and can be installed in either orientation on your sander.
Troubleshooting
Belt not tracking straight
Ensure the belt is correctly seated on the rollers and that the tracking adjustment mechanism on your sander is properly set. Refer to your belt sander's manual.
Belt slips or falls off
Check that the belt tension is adequate and that the belt is the correct size for your sander. Ensure the rollers are clean and free of debris.
Rapid belt wear or burning
Reduce the pressure applied during sanding. Ensure the belt is not used on materials it is not intended for and that the sander's cooling vents are clear.
Pros and Cons
Pros
- Fits a wide range of common belt sanders.
- Cost-effective pack of three.
- Suitable for various materials.
- Good for initial shaping and material removal.
Cons
- 80 grit is not suitable for fine finishing.
- May wear out faster on very demanding applications.
- Requires a compatible belt sander model.
Setup, Compatibility & Care
Compatibility: These belts are designed to fit belt sanders that use 76 x 457mm (3 x 18 inch) sanding belts. Always check your belt sander's specifications to confirm the correct belt size before purchasing.
Setup: To install, ensure the belt sander is unplugged. Release the tension on the belt, remove the old belt, place the new belt onto the pulleys, and apply tension. Make sure the belt is tracking correctly on the sander's rollers. Consult your belt sander's manual for specific installation instructions.
Care: Sanding belts are consumable items and wear down with use. To maximize their lifespan, avoid excessive pressure which can cause premature wear or burning. Periodically check the belt for signs of wear, such as glazing or tears, and replace it as needed to maintain optimal performance and prevent damage to your workpiece or the sander.