D-C-Fix Tinted Heat And Glare Protection Static Cling Window Film - 2M x 90cm
Dc fix tinted heat and glare protection static cling window film uses an easy non-adhesive applica...Dc fix tinted heat and glare protection static cling window film uses an easy non-adhesive application method. The film adheres to the glass using water and static cling technology. This film offers 25% visible light transmission, 99% UV protection and 60% heat protection, ideal for use in a conservatory or home office reducing glare and making it more comfortable in the hot summer months.The box includes the film, squeegee and full instructions. The application is quick and easy, apply to smooth flat glass surfaces, simply spray the glass with plenty of water, remove one of the clear backing films before applying to the glass, smooth into position removing any excess water, by pushing out to the sides. If you make a mistake peel back and start again. The second protective backing film can be removed once the vinyl is in place. Leave to dry.The vinyl film can be removed, simply peel away from one corner. It comes away cleanly, leaving no residue behind. The film can be re-used using the water to re-apply. Wipe clean using regular household cleaners. High Quality dc fix is our preferred brand of vinyl film due to its 5* rating for static cling adhesion, opacity, lightfastness, shrinkage...
This guide is for anyone looking to reduce heat and glare in their home or office using D-C-Fix Tinted Heat and Glare Protection Static Cling Window Film. The film offers an easy, non-adhesive application, providing 25% visible light transmission, 99% UV protection, and 60% heat protection. Keep in mind that while the film is reusable, the effectiveness might decrease over multiple applications.
All features
Brand
d-c-fix
Extended Product Information
FAQs
How do I clean the window film?
You can clean the film with regular household cleaners and a soft cloth or sponge.
Can I reuse the film?
Yes, the film is reusable. Simply peel it off, rinse with water, and reapply. However, its effectiveness might decrease with repeated use.
Does the film block all light?
No, the film allows 25% visible light transmission. It reduces glare and protects from UV rays while still allowing light to enter.
What tools do I need to apply the film?
The product includes a squeegee. You will also need a spray bottle with water and a clean cloth or paper towel.
How long does it take for the film to dry and adhere?
Allow the film to dry completely after application. This may take several hours, depending on the environment.
Can the film be applied to any type of window?
It is designed for smooth, flat glass surfaces. It is not recommended for textured or uneven glass.
How do I remove the film?
Simply peel a corner of the film and slowly remove it from the glass. It should come off cleanly, leaving no residue.
Troubleshooting
Film won't stick
Ensure the glass surface is clean and wet. Use more water during application and smooth out all air bubbles.
Bubbles remain after application
Use the squeegee to push bubbles towards the edges of the film. Lift the film and reapply if necessary.
Film is difficult to remove
Start from a corner and peel slowly. If residue remains, use soapy water to clean.
Pros and Cons
Pros
Easy installation with water and static cling.
Significant reduction in heat and glare.
Protects against harmful UV rays.
Reusable and easy to remove without residue.
Comes with all necessary application tools.
Simple to clean with household products.
Cons
Effectiveness may decrease with repeated removal and reapplication.
Requires a smooth, flat glass surface for optimal adhesion.
Visible light transmission is reduced by 25%.
May require some practice for a perfect, bubble-free application.
Setup, Compatibility & Care
Setup
Preparation: Clean the glass surface thoroughly, ensuring it's free of dust and debris.
Application: Spray the glass generously with water.
Film Application: Remove one of the clear backing films and apply the film to the wet glass.
Positioning: Smooth the film into place, removing air bubbles and excess water using the included squeegee.
Finishing: Once positioned, remove the second protective backing film.
Drying: Allow the film to dry completely. The static cling will then hold it in place.
Compatibility
Compatible with smooth, flat glass surfaces.
Not recommended for textured or uneven glass.
Care
Clean with regular household cleaners.
Avoid abrasive cleaners or tools that may scratch the film.