For a speedy system build use compression fittings.
Best current price£5.24from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£5.24Visit shop Plumbright Compression Tank Connector 22Mm Dzr L921dr.2
Visit shop
B&Q£11.93Visit shop B&Q - Compression Tank Connector 22mm Dzr L921Dr.2
Visit shop2 offers from £5.24 - £11.93
View price history by clicking the chart icon.
This guide is for plumbers and DIY enthusiasts building or repairing water systems who need a reliable and quick connection method. The Plumbright Compression Tank Connector offers a speedy system build due to its use of compression fittings, allowing for efficient installation. A potential consideration is ensuring proper torque to avoid over-tightening, which could damage the fitting or pipe.
| Model Part Number | L921DR.2 |
|---|---|
| Brand | Plumbright |
You will typically need two wrenches to properly install and tighten the compression nut. A pipe cutter and deburring tool may also be useful for preparing the pipe end.
Yes, this type of compression fitting is generally suitable for use in both cold and hot water systems, provided the system's operating temperature and pressure are within the fitting's specifications.
Tighten the nut until it is snug, then typically turn it an additional 1/2 to 3/4 of a turn with wrenches. Refer to manufacturer guidelines for specific torque values if available. Overtightening can damage the pipe or fitting, while undertightening can lead to leaks.
While it's possible to dismantle and reuse a compression fitting, it is generally recommended to use a new olive (the brass ring) each time to ensure a reliable seal. The fitting body and nut can often be reused if they are in good condition.
The primary advantage is the speed and ease of installation, as they do not require soldering, flux, or a flame, making them ideal for tight spaces or situations where heat is a concern.
Compression fittings are typically designed for above-ground use. For underground applications, you should consult specific product ratings and local plumbing codes, as other jointing methods might be more appropriate.
Check that the compression nut is adequately tightened. If it's loose, tighten it further. Ensure the pipe is fully inserted into the fitting and the olive is correctly positioned. If the leak persists, the olive or pipe may be damaged, and the fitting may need to be replaced.
Ensure no debris is present in the fitting threads. Verify you are using the correct size wrenches. Do not force the nut; if significant resistance is met, stop and re-examine the alignment and pipe condition.
Confirm the pipe is clean and properly deburred. Ensure the correct size pipe (22mm) is being used. Check the fitting itself for any manufacturing defects or damage. Replace the fitting if necessary.
Setup: Ensure the pipe end is clean, square, and free from burrs. Slide the compression nut and then the olive onto the pipe. Insert the pipe fully into the fitting body. Screw the compression nut onto the fitting body by hand, then tighten with two wrenches – one to hold the fitting body and the other to turn the nut. Follow manufacturer torque recommendations if available to avoid over-tightening.
Compatibility: This connector is designed for 22mm diameter pipes, typically copper or suitable plastic plumbing pipes. Verify compatibility with your specific pipe material and system pressure requirements.
Care: These fittings are generally maintenance-free once installed. Periodically inspect visible connections for any signs of leakage, especially after initial installation or if system pressures fluctuate significantly. Ensure the area around the fitting is kept clean and dry.
