Best current price£35.00from eBay
Shopping.co.uk recommended and popular offers
eBay£35.00Visit shop Shimano Ultegra BR-R8070 Disc Brake Caliper.Flat mount, pads, Front Or Rear
Visit shopeBay£43.99Visit shop Shimano Ultegra BR-R8070 Hydraulic Disc Brake Caliper Flat Mount NO PADS
Visit shop9 offers from £35.00 - £125.08
View price history by clicking the chart icon.
The Shimano Ultegra R8070 Flat Mount Caliper is engineered for performance-focused road cyclists who demand consistent, reliable stopping power in diverse riding conditions. By utilizing oversized ceramic pistons and optimized heat dissipation technology, it provides superior control and modulation for high-speed descents. While it offers excellent braking performance, it requires a hydraulic disc-compatible frame setup, which may necessitate professional installation for those unfamiliar with internal fluid systems.
| Series | Ultegra R8070 |
|---|---|
| Model Part Number | BRR8070R |
| Brand | Shimano |
No, this is specifically designed for the road-standard flat mount system.
Absolutely not. This system is designed for mineral oil only; using DOT fluid will permanently damage the seals.
Yes, standard flat mount bolts are typically included, but please consult your specific frame requirements for length.
Bleeding is usually required only if the lever feel becomes soft or after extensive service, such as shortening the brake hose.
Yes, by adding the correct Shimano flat mount adapter, you can safely run 160 mm rotors.
Perform a one-way bleed to remove trapped air from the hydraulic circuit.
Verify the caliper is centered over the rotor and check that the pistons are not stuck by cleaning them gently with a non-abrasive tool.
Check the thickness of the brake pads; if they are below the manufacturer's recommended limit, replace them. Clean rotors with isopropyl alcohol to remove contaminants.
This caliper is designed exclusively for the flat mount standard found on most modern road disc frames. It comes pre-configured for 140 mm rotors, but can be adapted to 160 mm rotors using the appropriate flat mount adapter bracket.
Compatibility Requirements:
