Stephanoise Bias Binding Tape - Viscose Jersey - Sangria

Bias binding tape is used to finish raw edges of fabric, encasing them neatly. It's also often used as a decorative trim to add color or contrast to garments, accessories, and home decor items.

It's cut on the bias, meaning at a 45-degree angle to the fabric's warp and weft threads. This diagonal cut gives the tape its characteristic stretch and flexibility, allowing it to curve smoothly around edges.

Yes, its flexibility makes it suitable for quilting projects, especially for binding the edges of quilts or adding decorative accents. The viscose jersey offers a soft finish.

One meter of bias binding tape is typically 1 meter in length. The width it covers depends on how it's applied and the seam allowance used, but it's generally designed to encase a standard raw edge.

The 'Sangria' color is a rich, deep red, often with subtle undertones that give it a sophisticated and less vibrant appearance than a true primary red.

The most common methods are single-fold or double-fold. For single-fold, you sew the raw edge of the tape to the raw edge of your fabric, then fold it over to the other side and stitch. Double-fold involves folding the tape in half lengthwise before application.

While viscose is a natural fiber and generally takes dye well, the 'Sangria' color might be difficult to dye lighter or to a significantly different hue without potential unevenness. It's usually best to use it as is or choose a different color if a specific shade is required.

Ensure you are not pulling or stretching the tape as you sew. Pin it in place securely before stitching, and use a walking foot if your machine has one to help feed the fabric and binding evenly.

Make sure the bias binding is not being eased too much or too little. For sharp corners, clipping the seam allowance of the binding can help it lie flat. For curves, try using smaller pins and easing the fabric gently.

Always check color swatches or hold the binding against your fabric in good lighting before cutting and applying. Consider ordering a sample if unsure about the exact shade.

Handle the tape gently. If fraying is persistent, consider using a small amount of fray-checking liquid on the cut edges before application, or ensure your seam allowance covers the raw edge completely.