Best current price£144.86from eBay
Shopping.co.uk recommended and popular offers
eBay£144.86Visit shop Vent Axia 188110 ""LuminAir L"" Extractor Fan/Light Low Voltage (Standard Model)
Visit shop5 offers from £144.86 - £661.00
View price history by clicking the chart icon.
The Vent-Axia Luminaire is designed for safe installation directly over a shower, extracting moisture and humidity at the source to prevent damage. This unique extractor fan and light combination features Safety Extra Low Voltage (SELV) for shower area safety, and includes a 20-watt, 12-volt dichroic spot light. While it offers excellent protection against moisture, it requires a specific low-voltage power supply.
| Model Part Number | 118110 |
|---|---|
| Brand | Vent-Axia |
While the fan mechanism can operate outside the shower, its primary design and IPX7 rating are for direct installation within the shower cubicle to capture moisture at the source. For general bathroom ventilation, other models might be more suitable.
You will need a 12-volt Safety Extra Low Voltage (SELV) transformer. The wattage should be sufficient to power both the fan and the 20-watt light bulb, with some margin for safety. Consult an electrician for correct sizing and installation.
Yes, the 20-watt, 12-volt dichroic spot light bulb is replaceable. Power must be disconnected before attempting to replace the bulb.
IPX7 means the unit is protected against the effects of temporary immersion in water. This makes it safe for direct installation over shower heads where it may be exposed to water splashes or condensation.
Due to the low-voltage requirements and installation in a wet environment, it is highly recommended that installation is carried out by a qualified electrician to ensure safety and compliance with electrical regulations.
It is advisable to clean the exterior and fan grille monthly, or more frequently if you notice dust buildup, to maintain optimal performance and appearance.
Check the 12-volt power supply connection to the unit and the transformer. Ensure the transformer is receiving mains power and is functioning correctly. Verify that the light bulb is properly seated.
Ensure the unit is securely mounted. Check for any obstructions in the fan impeller or ducting. Clean the fan blades if dust accumulation is evident.
Turn off power. Check the light bulb for damage and ensure it is screwed in tightly. Replace the bulb with the correct 20-watt, 12-volt dichroic type if necessary.
Ensure the fan grille is clean and free of dust. Check that any connected ducting is not blocked or kinked. Verify that the unit is correctly installed within the shower enclosure.
Setup:
Compatibility:
Care:
