Clarks Inner Gear Cable - Galvanised - 2275mm - Silver - W5056C
Best current price£1.99from Tredz
Best offers
Shopping.co.uk recommended and popular offers
Tredz£1.99Visit shop Clarks Universal Galvanised Inner Gear Wire Tube Nipple
Visit shopTredz£1.99Visit shop One Offer
1 offer from £1.99
View price history by clicking the chart icon.
Product Information
Full details
This guide is for cyclists seeking a durable and reliable gear cable for their road, MTB, or hybrid bicycle. The key benefit is its robust galvanised construction offering good corrosion resistance and smooth shifting. A potential caveat is that it's a standard inner wire and may require specific tools for installation and adjustment. This Clarks inner gear cable is a 2275mm long, silver, galvanised wire designed for derailleur systems, compatible with most major cycle component manufacturers. It comes with crimp-on wire end covers.
All features
| Model Part Number | W5056C |
|---|---|
| Brand | Clarks |
Extended Product Information
FAQs
What is the difference between galvanised and stainless steel inner gear cables?
Galvanised cables have a zinc coating for corrosion resistance, offering good durability for general use. Stainless steel cables typically offer smoother operation and superior corrosion resistance but are often more expensive.
Do I need special tools to install this cable?
Basic bicycle maintenance tools are required, including cable cutters, pliers, and potentially hex wrenches for derailleur adjustments. A crimping tool is needed to secure the end covers, though pliers can often suffice for a basic crimp.
Can this cable be used for bicycle brakes?
No, this is specifically an *inner gear cable*. Brake cables have different dimensions and are designed for the higher forces involved in braking.
How often should I replace my gear cable?
Gear cables typically need replacement every 1-2 years, or sooner if you notice a degradation in shifting performance, rust, or fraying. Regular maintenance can extend cable life.
Is the 2275mm length suitable for all bikes?
2275mm is a generous length designed to fit most standard road, MTB, and hybrid bikes. For very unusual frame geometries or recumbent bikes, you might need to measure your existing cable length to confirm.
What are the crimp-on wire end covers for?
These small metal caps are crimped onto the very end of the inner gear cable after installation. They prevent the cable strands from unraveling (fraying) and provide a neat finish, protecting your fingers and bike frame from sharp edges.
Troubleshooting
Stiff or sticky gear shifting
Check for kinks or damage in the cable. Ensure the cable is properly lubricated where it enters the housing and shifter. Verify that cable housing is clean and free of debris.
Cable frays at the end
Ensure a crimp-on wire end cover is securely attached to the cable end to prevent further fraying. If fraying is significant, the cable may need to be replaced.
Gear indexing is off after installation
Re-adjust the derailleur indexing. Consult your bicycle's or derailleur's manual for specific instructions on setting gear limits and cable tension.
Pros and Cons
Pros
- Provides smooth gear changes.
- Galvanised finish enhances durability and corrosion resistance.
- Universal compatibility with most gear systems.
- Ample length suits various bicycle configurations.
- Includes necessary end covers for a clean installation.
Cons
- Requires user to have knowledge of gear cable installation.
- Galvanised finish may not be as aesthetically refined as stainless steel for some users.
- Performance might be slightly less smooth than premium, polished stainless steel cables under extreme conditions.
Setup, Compatibility & Care
Setup:
- Ensure your bicycle's gear system is compatible with standard inner gear cables.
- Remove the old gear cable.
- Feed the new Clarks Inner Gear Cable through the appropriate cable guides on your frame and into the shifter mechanism.
- Attach the cable to the derailleur using the provided bolt.
- Use pliers to crimp one of the included wire end covers onto the exposed end of the cable.
- Adjust derailleur indexing for optimal shifting.
Compatibility:
This cable is designed to be compatible with gear and brake systems from all major cycle component manufacturers. It is suitable for road, MTB, and hybrid bicycles.
Care:
While galvanised cables offer good corrosion resistance, regular cleaning is recommended. Wipe the cable with a clean, dry cloth after wet rides. Periodically, apply a light bicycle lubricant to the cable where it enters the shifter and housing to maintain smooth operation. Inspect for signs of wear or damage regularly.