ALM Manufacturing Spool & Line - RY054 - 1.5mm X 2 X 3m

The ALM Manufacturing RY054 Spool & Line is compatible with Ryobi model RLT4025 and Bosch models ART 24, ART 24+, ART 27, ART 30 (3600 HA5 470), and ART 30-36 Li.

The cutting line has a diameter of 1.5mm and each of the two lines measures 3 meters in length.

The 1.5mm diameter line is suitable for general grass trimming and light weed cutting. For very tough or woody weeds, a thicker line might be more effective, but this product is specifically designed for the stated compatibility and general use.

This product includes two separate lines, each 3 meters long.

It compares to part numbers F015800351 and F016L72437.

Refer to your grass trimmer's manual for specific instructions. Generally, you will need to open the trimmer head, remove the old spool, place the new spool, feed the line ends through the eyelets, and reassemble the head cover.

Ensure the line is correctly threaded through the eyelets and that the spool is seated properly. You may need to manually advance the line by tapping the trimmer head on the ground or pressing the line advance button if your model has one.

Check for obstructions in the grass or around the trimmer head. Ensure the line is not worn or frayed. If cutting through very thick or woody material, consider if a thicker gauge line is needed for your specific task (though this product is 1.5mm).

Verify that the spool is correctly installed and that no debris is jamming the trimmer head mechanism. Ensure the trimmer is powered on and functioning correctly.