Bond It Floor Tile Grout - Grey

Coverage varies based on tile size and joint width. Refer to the product packaging for specific details. Note: The exact coverage depends on the depth and width of the grout joints and the size of the tiles.

While the grout is designed for ceramic tiles, ensure compatibility with natural stone. Always test in an inconspicuous area first.

Drying time depends on environmental conditions. Allow at least 24-72 hours for the grout to fully cure before exposing it to heavy use or water.

The shelf life is typically 12 months from the date of manufacture when stored in a dry environment and unopened. Always check the packaging for an expiry date.

After allowing the grout to set, use a damp sponge to wipe off excess grout from the tiles. Rinse the sponge frequently with clean water. Do not use harsh chemicals. A gentle pH-neutral cleaner is recommended.

Yes, it is suitable for use in showers, as it is water-resistant. Ensure proper preparation and application for a watertight seal.

You will need a grout float, a bucket for mixing, a sponge for cleaning, and a trowel or similar tool for applying the grout.

Bond it Floor Tile Grout is suitable for joints from 3mm wide up to 10mm wide.

Ensure the grout is mixed according to the instructions. Protect the grout from rapid drying by keeping the area out of direct sunlight or drafts. Make sure the tile adhesive has thoroughly dried before grouting.

Clean the area thoroughly after application. Avoid using harsh chemicals. Ensure proper ventilation during the drying process. Make sure to use the grout within its expiry date.

Ensure correct water to grout powder ratio during mixing. Check the expiry date of the product. Make sure the area has proper ventilation for drying. Ensure the substrate is clean and free of any contaminants.