Shopping.co.uk

Tetrion Make Good Seal Waterproof - Black

Tetrion Make Good Seal Waterproof - Black

Tetrion Make Good™ Seal & Waterproof. For flat roofs, asphalt, gutters & pipework. For use on meta...

Best current price£9.99from My Motor World

Best offers

Shopping.co.uk recommended and popular offers

All Offers

8 offers from £9.99 - £34.99

View price history by clicking the chart icon.

My Motor WorldTetrion Black Make Good Seal Waterproof 400Ml
Free delivery in 1–3 days
£9.99
Visit shop
eBayTetrion Make Good Seal & Waterproof Heavy Duty Spray 400ml Quickly Seals Leaks
Free delivery in 1–3 days
£11.98
Visit shop

Product Information

Full details

This guide is for anyone needing a reliable sealant and waterproof coating for various surfaces, including roofs, metal, and PVC. The Tetrion Make Good Seal & Waterproof offers instant leak sealing and durable protection, a key benefit for both preventative maintenance and immediate repairs. However, remember it's for exterior use only and cannot be overpainted.

All features

ColourBlack
BrandTetrion

Extended Product Information

FAQs

What surfaces can I use Tetrion Make Good Seal & Waterproof on?

It can be used on flat roofs, metal panels, gutters, pipework, walls, PVC, and tarmac.

Is this product suitable for indoor use?

No, it is for exterior use only.

Can I paint over Tetrion Make Good Seal & Waterproof?

No, it cannot be overpainted.

How long does it take for the coating to dry?

It is touch-dry in 2-3 hours and fully dry in 5-6 hours.

How should I prepare the surface before applying the sealant?

Remove loose dirt and debris, clean and dry the area, and lightly sand the surface to give a good key.

What color is the sealant?

It is black.

What is the size of the can?

The size of the can is 400ml.

Is this product resistant to abrasion?

Yes, Tetrion Make Good Seal & Waterproof is an abrasion resistant coating.

Troubleshooting

Spray button clogs

Invert the can and spray to release any blockage.

Coating runs or sags

Apply thinner coats and avoid over application.

Poor adhesion

Ensure the surface is clean, dry, and properly prepared with sanding.

Slow drying time

Ensure adequate ventilation and avoid applying coats too thickly or in cold conditions.

Pros and Cons

Pros

  • Seals leaks instantly.
  • Provides durable and abrasion-resistant coating.
  • Excellent adhesion to various surfaces.
  • Can be applied in all weather conditions.
  • Offers corrosion protection.
  • Easy to apply.

Cons

  • For exterior use only.
  • Cannot be overpainted.
  • Requires proper surface preparation for optimal results.
  • Color limited to black.
  • May require multiple coats for thicker protection.

Setup, Compatibility & Care

  1. Preparation: Remove loose dirt and debris from the surface. Clean and dry the area if needed. Remove any previous coatings using a wire brush and abrasive paper.
  2. Surface Keying: Lightly sand the surface with finer abrasive paper to improve adhesion. Clean and dry again.
  3. Application: Shake the aerosol can vigorously for at least 2 minutes. Test spray on a small, inconspicuous area to check the spray pattern. Apply in short, even, light coats, avoiding flooding the surface. Apply 2-3 light coats, allowing 15 minutes of drying time between each coat.
  4. Drying: The paint film should be touch-dry in 2-3 hours and fully dry in 5-6 hours.
  5. Compatibility: It is compatible with metal, walls, PVC, and tarmac. It is not designed to be overpainted.
  6. Care: Clean overspray and spillages before the coating dries using a white spirit-type solvent.

Price History

DatePrice
Visit shop