Rothley Twin Slot Shelving Kit - Copper

The kit includes 2 x 1981mm uprights and 6 x 270mm projection brackets. Shelves are sold separately.

Each shelf, when properly supported by the brackets, is tested to support up to 50kg.

While technically possible, cutting the uprights may compromise the integrity of the twin slot system and potentially void any warranty. It is generally recommended to use them at their provided length.

Yes, the kit only provides the uprights and brackets. You will need to purchase shelves separately that are compatible with 270mm projection brackets.

Clean gently with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.

The product information does not specify outdoor suitability. It is generally recommended for indoor use in dry environments to maintain the finish and prevent corrosion.

The appropriate wall fixings depend on your wall type (e.g., drywall, brick, concrete). You should use fixings specifically designed for your wall material and capable of supporting the intended load.

Ensure the uprights are securely fastened to the wall with appropriate fixings. Check that the wall material can support the intended load.

Verify that the bracket is fully inserted into the twin slot. Ensure there are no obstructions or debris within the slots or on the bracket mechanism.

Confirm the shelf is properly seated on the brackets and that the weight does not exceed the 50kg per shelf limit. Consider using wider or thicker shelves if available and compatible.

Clean the surface gently with a slightly damp, soft cloth. Avoid harsh chemicals. If the finish is damaged, touch-up paint may be necessary, though exact matching can be difficult.