Draper Adjustable Pipe Wrench - 225mm

The Draper Adjustable Pipe Wrench, 225mm, has a maximum jaw capacity of 45mm.

While it can grip round objects, this wrench is specifically designed for pipes. For nuts and bolts, a standard adjustable wrench or socket set is generally more appropriate to avoid damaging the fastener heads.

Position the pipe centrally in the jaws and tighten them firmly until the serrated teeth engage securely with the pipe surface. Ensure the pipe is clean and dry for optimal performance.

Induction hardening is a heat treatment process that makes the surface of the jaws significantly harder and more durable, increasing their resistance to wear and deformation.

Yes, it can be used on many types of plastic pipes, but care must be taken not to overtighten and crush the pipe. Adjust the grip firmly but avoid excessive force.

This wrench is manufactured in accordance with BS 3594 Part 1:1963.

Ensure the jaws are fully tightened onto the pipe. Check if the pipe surface is excessively smooth, wet, or greasy, and clean if necessary. Inspect the jaw teeth for wear; sharpen or replace if damaged.

Clean any debris from the adjustment threads and mechanism. Apply a light penetrating oil or lubricant to the threads and allow it to soak in before attempting to turn again.

Ensure you are using the correct size wrench for the pipe. For very small pipes, a smaller pipe wrench or a different type of wrench might be more suitable. Inspect the mechanism for obstructions.