Setup, Compatibility & Care
Setup:
- Identify secure anchor points on your trailer chassis and the vehicle's frame or designated recovery points.
- Wrap the soft round sling straps around the upper part of each alloy wheel, ensuring they fit snugly without excessive pressure.
- Attach the twisted snap hooks of the long ends of the ratchet straps to the trailer's anchor points.
- Connect the free end of the ratchet strap to the round sling strap on the wheel.
- Use the wide ratchet handle to incrementally tighten the strap until firm. Avoid overtightening, which could damage the wheel or strap.
- Repeat for all four wheels to ensure the vehicle is stable and secure.
Compatibility:
This set is compatible with most standard car trailers and vehicles, especially those with alloy wheels that require protection. The 50mm webbing and 5000KG MBL are suitable for a wide range of passenger vehicles.
Care:
- Inspection: Before each use, inspect all straps, hooks, and ratchet mechanisms for signs of wear, cuts, abrasions, or damage.
- Cleaning: Clean straps with cool, fresh water. Mild soap can be used if necessary, but rinse thoroughly. Do not use harsh chemicals or solvents.
- Drying: Allow straps to air dry completely away from direct sunlight or heat sources before storing.
- Storage: Store straps in a cool, dry place, away from sharp objects and chemicals. Ensure they are not kinked or twisted when stored.