Laser Tools Special Block - for Tesla Model 3 & Y - 9219
Best current price£32.79from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£32.79Visit shop Laser Tools Special Block - for Tesla Model 3 & Y - - 9219
Visit shopeBay£32.79Visit shop All Offers
3 offers from £32.79 - £32.80
View price history by clicking the chart icon.
eBayLaser Tools Special Block - for Tesla Model 3 & Y - - 9219
Free delivery in 1–3 days
£32.79
Visit shop
Laser Tools Special Lift Jacking Block For Tesla Model 3 & Y 1pc 150 x 80mm 9219Free delivery in 1–3 days£32.80Visit shop →
Laser Tools Special Lift Jacking Block For Tesla Model 3 & Y 1pc 150 x 80mm 9219Free delivery in 1–3 days£32.80Visit shop →
Product Information
Full details
This Laser Tools Special Block (9219) is designed for mechanics and DIY enthusiasts working with specific electric vehicles like the Tesla Model 3 & Y, and Fiat 600, particularly when using scissor, recessed, or standard 2/4 post lifts. Its key benefit is providing a stable, wear-resistant, and oil-resistant jacking point interface that enhances safety and reduces slippage risk, especially when used with compatible Laser lifting pads. A potential caveat is its specialized nature, requiring specific lifting pads for optimal performance.
All features
| Model Part Number | 9219 |
|---|---|
| Brand | Laser Tools |
Extended Product Information
FAQs
What vehicles is this special block designed for?
This block (9219) is specifically designed for vehicles like the Tesla Model 3 & Y and Fiat 600, which have specific jacking point requirements. Always confirm your vehicle's jacking point location.
Do I need anything else to use this block?
Yes, this block is designed to be used with compatible Laser lifting pads (Part Nos. 9060, 9061 & 9062) which attach to your lift arms. The block then sits on top of the lifting pad.
Can I use this block with any type of car lift?
The block is compatible with scissor lifts, floor recessed lifts, and standard 2 & 4 post lifts, provided the lift arms can be positioned correctly under the vehicle's jacking points.
How do I clean the special block?
After use, clean the block with a damp cloth. It is resistant to oil, but prompt cleaning will help maintain its condition. Avoid abrasive cleaners.
What is the main benefit of the stacked design?
The moulded slots allow blocks to be stacked securely. This increases friction between the blocks and the vehicle, significantly reducing the risk of slippage during lifting operations and allowing for adjustable height.
What is the block made of?
It is manufactured from Recycled Polyurethane (PU), which provides high wear resistance and oil resistance.
How thick is the block?
The block has a thickness of 40mm.
Is this block available in a set?
Yes, this block is also available as a set of 4 under Laser Part No. 9071.
Troubleshooting
Block seems unstable on lift pad.
Ensure you are using a compatible Laser lifting pad (9060, 9061, or 9062). Verify the block is fully seated onto the pad and that the pad is securely attached to the lift arm.
Vehicle appears to be slipping.
Immediately stop lifting and lower the vehicle safely. Check that the block is correctly positioned under the designated jacking point and that the surface is clean. Ensure no oil or grease is contaminating the contact surfaces. Re-evaluate if additional blocks are needed or if the current stacking configuration is stable.
Block is difficult to stack.
Ensure the moulded slots are clean and free of debris. Align the slots carefully before attempting to stack. The blocks are designed to fit snugly; excessive force is not required if aligned correctly.
Wear or damage observed on the block.
Discontinue use immediately. Inspect the vehicle's jacking point for any sharp edges that may have caused the damage. Replace the block if there are any signs of significant wear, cracking, or deformation to ensure safety.
Pros and Cons
Pros
- Increases safety and stability when lifting compatible vehicles.
- Made from durable, oil-resistant, and wear-resistant recycled polyurethane.
- Unique stackable design enhances friction and reduces slippage.
- Compatible with a range of common lift types.
- Specifically designed for popular electric vehicles like Tesla Model 3 & Y.
Cons
- Requires specific Laser lifting pads (9060, 9061, 9062) for full functionality.
- Primarily suited for specific vehicle models; may not be optimal for all cars.
- Individual block is 40mm thick; multiple may be needed for significant height.
- Weight is 0.23Kg per block; consider total weight if stacking multiple.
Setup, Compatibility & Care
Setup:
- Ensure your lift is stable and positioned correctly.
- Place the appropriate Laser lifting pad (Part Nos. 9060, 9061, or 9062) onto your lift arm.
- Position the Laser Tools Special Block (9219) onto the lifting pad, aligning it with the vehicle's designated jacking point.
- Carefully lower the lift until the block makes firm contact with the vehicle's jacking point. Ensure secure contact before proceeding to lift the vehicle.
- If additional height is needed, stack additional blocks using the integrated moulded slots, ensuring each block is securely seated.
Compatibility:
- Vehicles: Tesla Model 3, Tesla Model Y, Fiat 600, and other vehicles with compatible jacking points.
- Lifts: Scissor lifts, floor recessed lifts, standard 2-post lifts, standard 4-post lifts.
- Required Accessories: Laser lifting pads (Part Nos. 9060, 9061, 9062) are required for optimal and safe use.
Care:
- Clean the block after each use with a damp cloth to remove dirt and debris.
- Inspect the block regularly for signs of wear, damage, or cracking. Discontinue use if damage is found.
- Store in a clean, dry area away from direct sunlight and extreme temperatures.
- The block is oil-resistant, but prompt cleaning after exposure to oils or chemicals is recommended to maintain material integrity.