Shopping.co.uk

D-C-Fix Self-Adhesive Vinyl Wrap - Wild Oak - 90cm X 3M

D-C-Fix Self-Adhesive Vinyl Wrap - Wild Oak - 90cm X 3M

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£23.97from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £23.97 - £25.99

View price history by clicking the chart icon.

B&QB&Q - Wild Oak 90Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£23.97
Visit shop
Robert Dyasd-c-fix Oak Effect Vinyl Wrap - Brown - 90cm x 3m
£2.95 delivery
£25.99
Visit shop

Product Information

Full details

The D-C-Fix Self-Adhesive Vinyl Wrap in Wild Oak is designed for homeowners and renters looking to refresh surfaces like kitchen countertops, tabletops, and furniture on a budget. Its key benefit is providing a durable, realistic woodgrain effect that's easy to apply and fully removable, making it ideal for temporary updates or rental properties. A key caveat is its heat resistance limit of 70°C, requiring the use of worktop savers for hot pans.

All features

Model Part Number200-5397-3
Brandd-c-fix

Extended Product Information

FAQs

Can I apply this vinyl wrap to a painted surface?

Yes, provided the paint is smooth, well-adhered, and clean. For best results, ensure the surface is free from dust and grease. It's recommended to test on a small, inconspicuous area first.

How do I remove the vinyl wrap when I want a change?

Gently heat the vinyl with a hairdryer on a low setting. This softens the adhesive, allowing you to carefully peel the wrap off the surface. Pull slowly and steadily.

Is this product suitable for areas with high moisture, like a bathroom vanity?

While the vinyl surface is wipe-clean and somewhat water-resistant, it's crucial to ensure all edges are properly sealed with silicone sealant in high-moisture areas to prevent water ingress, which could lead to lifting.

What is the maximum temperature this vinyl can withstand?

The vinyl wrap is heat resistant up to 70°C. It is not suitable for direct contact with hot pans or baking dishes. Worktop savers are highly recommended.

Can I overlap the vinyl if I need more than one piece?

It is best to apply the vinyl in continuous lengths where possible for a seamless look. If overlapping is necessary, try to make it as minimal and neat as possible, perhaps along an existing seam or edge.

Does this product come in a continuous roll or is it cut?

This item is professionally cut from an original 15-meter d-c-fix master roll and repackaged to provide custom lengths. This ensures you receive a continuous length of vinyl, reducing waste compared to standard retail rolls.

What tools do I need for application?

You will need a utility cutter or sharp knife for trimming, a felt edge smoother or squeegee to remove air bubbles, and a hairdryer on a low setting for curves and removal. A measuring tape is also essential.

Is the 'Wild Oak' pattern a matte or glossy finish?

The product description indicates a realistic woodgrain effect. Typically, d-c-fix vinyls aim for a natural look, which often translates to a matte or satin finish to mimic real wood, but it's best to consult product images for precise visual detail.

Troubleshooting

Air bubbles or creases after application

Gently lift the vinyl edge using a craft knife or fingernail and reapply, smoothing out the bubble with a felt edge smoother. For stubborn bubbles, a pinprick can release trapped air.

Vinyl not sticking properly

Ensure the surface was clean and dry before application. For difficult areas, a light application of an appropriate adhesive spray might help, or try gently warming the vinyl with a hairdryer to activate the adhesive.

Difficulty applying around corners or curves

Use a hairdryer on a low heat setting to warm and soften the vinyl, making it more pliable. Gently stretch and mold it around the curve, holding it in place until it cools.

Vinyl lifting at the edges (especially near water)

Ensure edges, particularly around sinks and hobs, are properly sealed with a silicone sealant. If lifting has occurred, reapply sealant. Clean and dry the area thoroughly before attempting to re-adhere the vinyl, potentially using a hairdryer for warmth.

Residue left after removal

Use a hairdryer on a low heat setting to warm the residue, which should soften the adhesive. Gently peel or rub the residue away. For stubborn spots, a mild adhesive remover or isopropyl alcohol can be used, testing in an inconspicuous area first.

Pros and Cons

Pros

  • Budget-friendly alternative to replacing surfaces
  • Easy DIY application with repositionable adhesive
  • Removable, ideal for renters or temporary changes
  • Durable and wipe-clean surface
  • Realistic woodgrain effect enhances aesthetics
  • Customizable lengths available for reduced waste

Cons

  • Limited heat resistance (70°C) requires caution with hot items
  • Requires careful sealing around sinks and hobs to prevent water damage
  • May not be suitable for heavily textured or porous surfaces
  • Professional cut from master roll, not a factory-sealed retail roll
  • Requires additional tools for best application (smoother, cutter, hairdryer)

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and smooth. Remove any dust, grease, or old adhesive.
  2. Measure and cut the vinyl wrap using the grid on the reverse for guidance. Leave a small overlap if required.
  3. Peel back a small section of the backing paper.
  4. Carefully align the vinyl with the edge of the surface and begin applying, smoothing out air bubbles as you go with a felt edge smoother.
  5. Continue to peel back the backing paper and smooth the vinyl down, working from the center outwards.
  6. For curved edges, use a hairdryer on a low setting to gently heat and stretch the vinyl, molding it into place.
  7. Trim any excess vinyl with a sharp utility cutter.
  8. Seal edges around sinks and hobs with a suitable silicone sealant.

Compatibility:

  • Ideal for flat, smooth surfaces such as countertops, tabletops, furniture, and doors.
  • Not recommended for heavily textured, uneven, or porous surfaces.

Care:

  • Wipe clean with a damp cloth. Mild soapy water can be used for tougher dirt.
  • Wipe up spills immediately to prevent staining.
  • Avoid using abrasive cleaners or scourers, as they can damage the surface.
  • Do not place hot pans directly onto the vinyl; always use worktop savers.
  • Heat resistance is up to 70°C.

Price History

DatePrice
Visit shop