Oracstar PTFE Tape - White, 12m x 12mm x 0.075mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone using Oracstar PTFE Tape for pipe fitting. The key benefit is a super tight, watertight seal, specifically for water pipe fittings. A possible caveat is that proper application is crucial for achieving the best results. This guide will cover key features, how to use it, and troubleshooting common issues.
All features
| Model Part Number | PPS01 |
|---|---|
| Brand | Oracstar |
Extended Product Information
FAQs
What is PTFE tape?
PTFE (Polytetrafluoroethylene) tape is a synthetic fluoropolymer used for sealing pipe threads.
What is the purpose of PTFE tape?
It provides a watertight seal for threaded pipe connections, preventing leaks.
How much tape should I use?
Typically, 2-3 wraps around the threads are sufficient. The goal is to create a good seal, so adjust the number of wraps as needed.
Can I use this tape on gas lines?
No, this PTFE tape is designed for water pipe fittings and is not suitable for gas lines.
How do I store the PTFE tape?
Store the tape in a cool, dry place. There are no special storage requirements.
What are the dimensions of the tape?
The tape is 12 meters long, 12mm wide, and 0.075mm thick.
What standards does the tape meet?
The tape is manufactured to BS Standards.
Troubleshooting
Leakage after installation.
Ensure the tape is wrapped correctly and enough layers have been used. Disassemble the joint, re-apply the tape, and reassemble.
Tape tearing during application.
Apply the tape with gentle tension, avoid excessive stretching, and ensure the threads are clean.
Pros and Cons
Pros
- Creates a secure and leak-proof seal.
- Easy to apply, saving time and effort.
- Complies with BS Standards, guaranteeing quality and reliability.
- Durable and long-lasting seal.
- Specifically designed for water pipe fittings
Cons
- Requires proper application technique for optimal results.
- Not suitable for all types of pipe fittings (e.g., gas lines).
- May require reapplication if not installed correctly.
Setup, Compatibility & Care
- Preparation: Clean the pipe threads to remove any debris.
- Application: Wrap the PTFE tape around the male threads, starting from the end of the pipe and winding in the direction of the threads. Overlap the tape slightly.
- Amount: Use enough tape to create a good seal. Typically, 2-3 wraps are sufficient.
- Assembly: Screw the fittings together firmly. Avoid over-tightening.
Compatibility
Oracstar PTFE Tape is compatible with most standard pipe fittings, particularly those used in water supply systems.
Care
Store the tape in a cool, dry place. No special care is required after application.