Plumbsure Compression 90° Wallplate Pipe Elbow - 15mm
Best current price£6.72from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£6.72Visit shop B&Q - Compression 90° Wallplate Pipe Elbow (Dia)15mm
Visit shopB&Q£6.72Visit shop One Offer
1 offer from £6.72
View price history by clicking the chart icon.
Product Information
Full details
This guide is for plumbers and DIY enthusiasts needing a reliable pipe fitting for domestic and industrial applications. The key benefit is the durability and corrosion resistance offered by its brass construction, ensuring long-term performance. A potential caveat is that proper installation is crucial to prevent leaks. The Plumbsure Compression 90° Wallplate Pipe Elbow is designed for connecting pipes at a right angle, featuring compression fittings for a secure, leak-free joint without the need for soldering.
All features
| Brand | Plumbsure |
|---|
Extended Product Information
FAQs
What material is this pipe elbow made of?
The Plumbsure Compression 90° Wallplate Pipe Elbow is made from brass.
What size pipes does this fitting work with?
This fitting is designed for 15mm diameter pipes.
Do I need to solder this fitting?
No, this is a compression fitting. It uses a nut and olive to create a seal, requiring no soldering.
Can this fitting be used for hot water?
Yes, brass fittings are generally suitable for hot water applications, provided the system's temperature and pressure are within the fitting's rated limits.
How do I ensure a leak-free connection?
Ensure the pipe ends are clean and smooth, the olive is correctly positioned, and the compression nut is tightened firmly but not excessively. Overtightening can damage the pipe or fitting.
What is the purpose of the wallplate?
The wallplate provides a stable mounting point, helping to support the pipework and ensure a tidy installation when the elbow is positioned against a wall or surface.
Is this fitting suitable for gas pipes?
This fitting is designed for water systems. Always use fittings specifically approved for gas installations.
Troubleshooting
Leak at the compression joint
Check if the compression nut is sufficiently tightened. Ensure the olive is correctly seated and that the pipe is not damaged. If the leak persists, the olive or fitting may be faulty, and replacement may be necessary.
Difficulty tightening the nut
Ensure the threads on the nut and fitting are clean and free of debris. Make sure the olive is not binding on the pipe or fitting.
Fitting does not fit onto the pipe
Verify that you are using the correct size fitting (15mm) for your pipe. Ensure the pipe end is clean and free of any obstructions or damage.
Pros and Cons
Pros
- Excellent durability and longevity due to brass material.
- Corrosion-resistant, ideal for water systems.
- Easy to install with compression fittings, no special tools required.
- Provides a secure and leak-free connection.
- Suitable for both domestic and industrial plumbing.
- 90° angle allows for efficient pipe routing.
Cons
- Requires careful tightening to avoid over-compression and potential damage.
- May be more expensive than plastic alternatives.
- Brass can tarnish over time if not maintained.
- Not suitable for extreme temperature or pressure applications without specific ratings.
- Requires access to the pipe for installation.
Setup, Compatibility & Care
Setup:
- Ensure the pipe ends are clean, dry, and free from burrs.
- Slide the compression nut and then the olive (compression ring) onto the pipe.
- Insert the pipe into the elbow fitting.
- Slide the olive down to the fitting and then thread on the compression nut.
- Tighten the compression nut using two wrenches – one to hold the fitting, the other to turn the nut. Tighten until snug, then give it an additional quarter to half turn. *Do not over-tighten.*
Compatibility:
- Compatible with standard 15mm copper, brass, or plastic pipes designed for compression fittings.
- Ensure the working pressure and temperature ratings of the fitting are suitable for your application.
Care:
- Brass fittings are generally maintenance-free. If they become tarnished, they can be cleaned with a brass cleaner.
- Periodically check existing installations for any signs of leakage, especially after the initial installation period.