Pack of 16 Double-Sided Foam Adhesive Tape 35mm

While specific operating temperatures are not listed, double-sided foam tapes generally perform best at room temperature (between 65°F and 80°F or 18°C and 27°C) and may lose adhesion in extreme cold or heat.

The product description focuses on indoor applications like refrigerators and walls. For outdoor use, consider tapes specifically designed for weather resistance, as this foam tape may degrade with exposure to UV rays and moisture.

The tape has good load-bearing properties and can replace screws/rivets, but specific weight limits are not provided. It's recommended to test with a lower weight first for critical applications.

Yes, this double-sided foam adhesive tape creates a strong, permanent bond. Removal may require heat or solvents and could potentially damage surfaces.

This tape is best suited for smooth, clean surfaces. Adhesion on porous or textured materials like fabric may be significantly reduced.

Each tape pad is 35mm in size. The pack contains 16 such pads.

Ensure surfaces are thoroughly cleaned, dried, and free of any dust, oil, or residue. Reapply pressure to ensure full contact.

Verify that the correct amount of tape was used for the weight or stress of the application. Ensure surfaces were properly prepared and that the bond has had sufficient time to cure (typically 24-72 hours for maximum strength).

Use a pin or sharp object to gently lift a corner of the backing paper before peeling. Ensure fingers are dry to avoid slippage.