Best current price£17.99from eBay
Shopping.co.uk recommended and popular offers
eBay£17.99Visit shop 4x Bartoline Raw Linseed Oil Natural Wood Protector Paint Varnish 250mL
Visit shop
B&Q£24.99Visit shop B&Q - 4X Raw Linseed Oil Natural Wood Protector Paint Varnish 250Ml
Visit shop3 offers from £17.99 - £24.99
View price history by clicking the chart icon.
Bartoline Raw Linseed Oil is an essential treatment for woodworkers, gardeners, and DIY enthusiasts looking to enhance and protect their wooden surfaces or porous stone floors. It offers exceptional water resistance, making it a reliable choice for garden furniture and high-traffic terracotta tiling; however, users should note that it requires a patient drying period of approximately one week, and practitioners must be diligent about the safe disposal of oil-soaked cloths to avoid fire hazards.
| Model Part Number | RL4890 |
|---|---|
| Brand | Bartoline |
No, Bartoline recommends using Teak Oil for hardwoods like Oak and Teak.
You should allow 24 hours between each coat to ensure proper penetration and drying.
All equipment, including brushes or rags, should be cleaned using White Spirit.
Absolutely not. Soiled rags are a fire hazard due to the risk of self-ignition. Wash them in soapy water and dispose of them outside immediately.
Yes, it is highly effective on porous stone, specifically terracotta tiling.
No, Raw Linseed Oil acts as a penetrating treatment and does not require a separate primer.
This usually indicates too much oil was applied. Wipe the surface with a cloth dampened with White Spirit to remove the excess oil layer.
Ensure the wood is not already sealed with a varnish or polyurethane. You must sand the surface until the raw fibers are exposed.
Apply a light sanding with fine-grit sandpaper between coats to smooth out the wood grain fibers that may have risen.
Before application, ensure the surface is completely clean and dry. If the surface has been previously painted or stained, you must sand it down to the raw wood. Clean the surface with White Spirit to remove any residual grease. If mildew is present, treat the area with a Fungicidal Wash before beginning.
Application involves rubbing the oil in well with a clean, lint-free cloth. For optimal protection, 2 to 3 coats are recommended. After use, do not leave oily rags in a pile, as they can spontaneously combust. Wash all used cloths thoroughly in soapy water and dispose of them safely outside immediately.
