Irwin Hacksaw Blade - 300mm - 32 TPI - Pack of 2 - Bi Metal

These blades are suitable for cutting various materials including metal, plastic, and wood.

Insert the blade into the hacksaw frame, ensuring the teeth point in the direction you will be cutting. Tighten the blade securely.

Blade life depends on the material being cut and the frequency of use. Inspect the blade regularly and replace it when it becomes dull or damaged.

While these blades can cut various materials, their 32 TPI design is best suited for thinner materials and detailed work. For thicker materials, blades with lower TPI may be more appropriate.

Store the blades in a dry place to prevent rust. You can use the original packaging or a designated storage container.

Always wear safety glasses when using a hacksaw. Ensure the workpiece is securely clamped and apply even pressure while cutting.

Replacement blades can be purchased at most hardware stores or online retailers.

Check blade tension in the frame; ensure it's tight. Reduce cutting pressure and ensure the blade is appropriate for the material.

Check if the blade teeth are clogged. Use a wire brush to clean. Ensure you are using the correct blade for the material.

Verify the frame size compatibility. The blade is 300mm (12in) long, so the frame must be designed for this size.