d-c-fix Nordic Elm Light Grey Sticky Back Plastic Vinyl Wrap Film - 67.5cm x 5m

Upgrade your home decor with this classic Nordic Elm Light Grey Vinyl Film by d-c-fix. With an aut...

Best current price£25.50from Homebase

All Offers

3 offers from £25.50

View price history by clicking the chart icon.

HomebaseD-C-Fix Nordic Elm Light Grey Sticky Back Plastic Vinyl Wrap Film 67.5Cm X 5M
Free delivery in 1–3 days
£25.50
Visit shop
wilkod-c-fix Nordic Elm Light Grey Sticky Back Plastic Vinyl Wrap Film 67.5cm x 5m
Free delivery in 1–3 days
£25.50
Visit shop

Product Information

Full details

This d-c-fix Nordic Elm Light Grey Vinyl Film is designed for DIY enthusiasts looking to refresh home surfaces like kitchen doors, worktops, and furniture. Its key benefit is an authentic, light Scandi woodgrain look that's easy to apply thanks to its self-adhesive and repositionable nature. A potential caveat is the need for careful sealing in wet areas for maximum longevity.

All features

Model Part Number67.5cm x 5m
Brandd-c-fix

Extended Product Information

FAQs

Is this vinyl film suitable for outdoor use?

This vinyl film is designed for interior use. Prolonged exposure to UV rays and weather conditions can degrade the material and adhesive.

Can I apply this film over existing wallpaper?

It is best applied to smooth, solid surfaces. Applying over wallpaper may result in an uneven finish and potential adhesion issues, especially if the wallpaper is textured or peeling.

How heat resistant is the film?

The film is heat resistant up to 70°C. It is not suitable for direct contact with hot objects like cooking pans or ovens. Always use protective mats.

Can this be used on food preparation surfaces?

While the surface is wipe-clean, it's recommended to use cutting mats for food preparation to prevent scratches and cuts, and to seal edges in wet areas like around sinks.

What tools are recommended for application?

A sharp craft knife or scalpel, a metal ruler for straight cuts, a squeegee or firm credit card for smoothing, and a soft cloth are recommended.

Is the adhesive strong enough for vertical surfaces?

Yes, the self-adhesive backing is designed to hold firmly on properly prepared vertical surfaces. Ensure the surface is clean and smooth for optimal adhesion.

How do I clean stubborn marks?

For stubborn marks, try a soft cloth dampened with a mild soapy water solution. Avoid abrasive cleaners. If necessary, a small amount of isopropyl alcohol can be tested on an inconspicuous area.

Troubleshooting

Air bubbles or wrinkles during application

Gently peel back the film to the point of the bubble/wrinkle and re-apply, smoothing from the center outwards with a squeegee. For stubborn bubbles, a pinhole may help release trapped air.

Film not adhering properly

Ensure the surface is thoroughly cleaned and dried. Re-apply pressure with a squeegee. For very porous surfaces, a primer might be needed, but test in an inconspicuous area first.

Difficulty trimming edges cleanly

Use a very sharp craft knife or scalpel and a metal ruler for a straight, clean cut. Applying gentle heat with a hairdryer can sometimes make trimming easier.

Residue left after removal

The removable adhesive is designed to minimize residue. If any remains, it can usually be removed with a specialized adhesive remover or a mild solvent like isopropyl alcohol, tested first on an inconspicuous area.

Pros and Cons

Pros

  • Easy DIY application with repositionable features.
  • Authentic and attractive woodgrain aesthetic.
  • Suitable for renters due to removable adhesive.
  • Durable and simple to clean.
  • Good heat resistance for common household uses.

Cons

  • Requires careful sealing around wet areas like sinks.
  • May require practice for a perfectly smooth finish on complex surfaces.
  • Heat resistance limit means hot pans still need protection.

Setup, Compatibility & Care

Setup:

  1. Prepare the Surface: Ensure the surface is clean, dry, smooth, and free from dust or grease.
  2. Measure and Cut: Measure the surface and cut the vinyl film with a slight overlap using a sharp craft knife and ruler.
  3. Apply: Gently peel back a small section of the backing paper. Align the film with the edge of the surface and carefully smooth it down.
  4. Smooth Out Bubbles: As you peel away the backing paper, use a squeegee or soft cloth to smooth the film from the center outwards, pushing out any air bubbles.
  5. Trim Excess: Trim any excess film with a sharp craft knife.

Compatibility:

  • Suitable for smooth, non-porous surfaces such as laminate, painted wood, metal, and glass.
  • Not recommended for heavily textured, uneven, or unsealed surfaces.

Care:

  • Wipe clean with a damp cloth and mild detergent.
  • Avoid abrasive cleaners or scouring pads.
  • For lasting use, use mats for hot pans or direct heat sources. Seal around wet areas like sinks and hobs with silicone sealant.

Price History

DatePrice
Visit shop