JCP Fixings Ankerbolts - Hexagon Head Mechanical Galv - 12/14 X 200mm - Silver - Box of 20

These ankerbolts are primarily used for robust fastening in heavy-duty construction applications, such as securing structural elements, heavy machinery, or fixtures to solid substrates like concrete, brick, and blockwork.

They are made from High-Quality Galvanised Steel, which provides excellent resistance to corrosion.

You should use a masonry drill bit of the specified diameter for the 12/14mm ankerbolt, which is typically slightly larger than the shaft but smaller than the expansion sleeve. Always refer to the specific product packaging or technical data sheet for the exact drill bit size required.

The hole should be drilled to a depth at least equal to the embedment length of the ankerbolt. Refer to the product specifications for the exact required depth.

Yes, the galvanised steel construction provides good corrosion resistance, making them suitable for many outdoor applications. However, performance in extremely harsh or marine environments should be assessed.

They are best suited for solid substrates like concrete, solid brick, and dense blockwork. They are not intended for use in hollow walls or plasterboard.

A box contains 20 ankerbolts.

Ensure the hole was drilled to the correct depth and diameter. Check that the substrate is solid and suitable for mechanical anchoring. Verify that the ankerbolt was fully inserted before tightening.

Confirm you are using the correct size socket wrench for the hexagon head. Ensure the hole is clean and free of obstructions that might impede the ankerbolt's expansion.

This may occur over time in very harsh or marine environments. For critical applications, consider protective coatings or a more corrosion-resistant material if available. For minor surface corrosion, it may not impact structural integrity but should be monitored.