Mahle Oil Filter - OX 406

Best current price£6.41from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£6.41Visit shop x1 Mahle Oil Filter OX406 70355323 replaces 70355322 OE 1651005240 Made in ID
Visit shop
Best current price£6.41from eBay
Shopping.co.uk recommended and popular offers
eBay£6.41Visit shop x1 Mahle Oil Filter OX406 70355323 replaces 70355322 OE 1651005240 Made in ID
Visit shop10 offers from £6.41 - £11.98
View price history by clicking the chart icon.
This guide is for vehicle owners and mechanics using the Mahle OX 406 oil filter. It helps ensure optimal engine performance by providing clear instructions on setup, maintenance, and troubleshooting. The Mahle OX 406 is designed for a perfect fit and efficient filtration, preventing premature wear. Keep in mind that replacing the oil filter at the intervals specified by your vehicle's manufacturer is crucial for engine health.
| Model Part Number | OX 406 |
|---|---|
| Brand | Mahle |
Replace the oil filter at the intervals recommended by your vehicle manufacturer. This is typically every 3,000 to 10,000 miles, or as specified in your owner's manual.
Use the type and viscosity of oil recommended in your vehicle's owner's manual.
No, oil filters are designed for single use and must be replaced at each oil change.
The dimensions are: Outer Diameter: 44mm, Height: 40mm.
It helps to remove contaminants and prevent premature wear of engine components, extending the life of your engine.
Dispose of the used oil filter properly according to local regulations. Most auto parts stores accept used filters for recycling.
Check oil level and filter installation. If the issue persists, consult a mechanic.
Stop the engine and check the oil level. Have the engine inspected by a qualified mechanic.
Check the filter's seal and ensure proper installation. Tighten if needed, but do not overtighten.
Ensure that the Mahle OX 406 oil filter is compatible with your vehicle model. Always refer to your vehicle's manual for the correct oil filter specifications and replacement intervals. When installing, make sure to lubricate the filter's gasket with fresh oil before screwing it in. Tighten the filter by hand until the gasket makes contact, then tighten an additional half to three-quarters of a turn. Do not overtighten. Dispose of used filters properly, according to local regulations.