Best current price£24.25from eBay
Shopping.co.uk recommended and popular offers
eBay£24.25Visit shop Varilight JYP401.MB Urban Matt Black 1 Gang 2 Way LED Dimmer Switch 0-120W V-Pro
Visit shop
B&Q£26.40Visit shop B&Q - Single V-Pro Rotary 2-Way Led Dimmer 1 X 0-120WUrban Matt Black With Matt Black KnobJyp401.mb
Visit shop3 offers from £24.25 - £31.06
View price history by clicking the chart icon.
The Varilight 1-Gang 2-Way V-Pro LED Dimmer in Matt Black is designed for homeowners and interior designers seeking a stylish and functional lighting control solution. Its key benefit is providing smooth, intelligent dimming for LED lights, enhancing ambiance and energy efficiency, with a caveat that compatibility with certain older or non-standard LED types may require checking.
| Colour | Black |
|---|---|
| Brand | Varilight |
The maximum wattage depends on the type of bulb. For LED and CFL loads, the maximum is typically lower than for incandescent. Always refer to the product's specific technical specifications or the manufacturer's website for precise wattage ratings, as it varies for different bulb types.
No, this dimmer is designed exclusively for dimmable light sources. Using non-dimmable bulbs will likely result in poor performance, flickering, or damage to the bulbs and/or dimmer.
Look for bulbs explicitly labeled as 'dimmable'. It is also recommended to check Varilight's official compatibility list for recommended LED bulb models that work best with their V-Pro dimmers.
'2-Way' refers to the ability to control a single light or lighting circuit from two separate locations using two switches. This is common for staircases, long hallways, or rooms with multiple entrances.
This specific model is a traditional dimmer switch and does not have built-in smart home capabilities. Smart control would typically require a separate smart switch or integration with a smart home hub.
Use a soft, dry, or slightly damp microfiber cloth. Avoid abrasive cleaners, solvents, or ammonia-based products, as these can damage the finish.
Ensure the LED bulbs used are specifically marked as 'dimmable'. Check that the total wattage of the connected bulbs is within the dimmer's specified range and that the bulbs are compatible with V-Pro technology. Try a different brand of dimmable LED bulbs.
Verify that the power supply is on and the wiring connections are secure. Check the fuses or circuit breaker for the lighting circuit. If using 2-way switching, ensure both switches are wired correctly.
Some warmth is normal during operation, especially under heavy load. However, if it feels excessively hot, turn off the power and check the total wattage of the connected bulbs against the dimmer's maximum rating. Overloading can cause overheating.
A low-level hum can sometimes occur with dimmers, particularly with certain types of LED bulbs. Ensure you are using high-quality, dimmable LED bulbs. Compatibility with specific LED drivers can sometimes be the cause.
Setup: This dimmer requires installation by a qualified electrician. Ensure the power is switched off at the mains before attempting any electrical work. Follow the wiring diagrams provided with the unit carefully. Note the 2-way wiring configuration if controlling lights from two locations.
Compatibility: The V-Pro technology is designed to work with dimmable LED, dimmable CFL, incandescent, and halogen light sources. Always check the wattage compatibility for your specific lighting load and refer to Varilight's compatibility guides for specific LED bulb recommendations. The maximum load for LEDs is typically lower than for incandescent bulbs.
Care: To clean the dimmer, switch off the power at the mains. Use a soft, dry cloth to wipe the faceplate. Avoid using abrasive cleaners or solvents, which can damage the Matt Black finish.
