Best current price£15.28from eBay
Shopping.co.uk recommended and popular offers
eBay£15.28Visit shop Ball Joint Lower 33841 Febi Suspension 5237516 Genuine Top Quality Guaranteed
Visit shop10 offers from £15.28 - £21.33
View price history by clicking the chart icon.
This febi bilstein ball joint (part number 33841) is designed for the front right lower control arm of Saab 9-5 models manufactured between 1998 and 2009. It offers a direct replacement solution to restore proper steering and suspension function, ensuring vehicle safety and handling. A key benefit is its inclusion as part of a ProKit, providing necessary fastening materials for a complete installation. A caveat is that professional installation by a competent individual is required.
| Model Part Number | 33841 |
|---|---|
| Brand | febi bilstein |
'ProKit' indicates that the ball joint comes supplied with all the necessary fastening and mounting hardware required for its installation, providing a more convenient and complete solution.
While possible for experienced DIY mechanics, febi bilstein recommends that this product be installed by a competent individual or qualified professional due to the critical nature of steering and suspension components.
This ball joint is designed for a control arm with a cone size of 20 mm and has mounting points with a diameter of 10.5 mm.
Common signs include clunking noises, steering wheel looseness or vibration, and uneven tire wear. It's best to have a professional inspect your suspension if you suspect a worn ball joint.
This specific ball joint (33841) is compatible with Saab 9-5 models manufactured between 1998 and 2009, for the front right lower position only.
The product weighs approximately 0.475 kg.
No, this ball joint is a sealed unit. Regular lubrication is not required. Focus on ensuring the protective rubber boot is intact to prevent contamination.
This often indicates a worn or loose ball joint. The febi bilstein ball joint 33841 is a replacement part for this issue. Ensure professional installation to properly torque and secure the new joint.
Worn ball joints can cause misalignment. This part replaces the faulty joint, but a professional wheel alignment should be performed after installation to correct any accumulated alignment issues.
A worn ball joint contributes to play in the steering system. Replacing it with the febi bilstein 33841 will help restore a tighter steering response. Verify that all mounting hardware is correctly tightened.
Double-check that you have the correct part number (33841) for your specific Saab 9-5 model year and that you are attempting to install it on the correct side (front right lower control arm). Verify the control arm's cone size and mounting point diameters match the specifications (20mm cone, 10.5mm mounting points).
Setup & Installation:
This ball joint is designed for the front right lower control arm of specific Saab 9-5 models (1998-2009). Installation requires the removal of the front wheel and disconnection of the suspension components. The ball joint fits into the control arm via a conical mounting point and is secured with nuts. Crucially, installation must be performed by a competent individual or qualified mechanic. Incorrect installation can lead to steering failure and safety hazards.
Compatibility:
Care:
Ball joints are sealed components and do not require regular lubrication. Their primary care involves ensuring the protective rubber boot remains intact. If the boot is torn or damaged, dirt and moisture can enter the joint, leading to premature wear and failure. Regular visual inspections of the suspension components, including the ball joint boot, are recommended during routine maintenance. Clean the surrounding area gently with a damp cloth if necessary, avoiding direct high-pressure washing that could force contaminants into the joint.
