Jetex Exhaust Bend - 1.75 Inch, 30 Degree

Jetex Exhaust Bends are manufactured from high-quality Swedish mild steel or stainless steel.

Mandrel bending means the pipe is supported internally by a mandrel during the bending process. This ensures the pipe's diameter and shape remain consistent, preventing kinks or flattening, which is crucial for smooth exhaust flow.

One end of the bend is flared and slotted, designed to accept a connecting pipe. The connection is typically made permanent through welding or secure clamping.

While designed for bespoke and competition use, they can be used for custom fabrication on road cars. However, ensure the resulting system complies with local emissions and noise regulations.

Jetex Exhaust Bends are available in 30, 45, 60, or 90-degree angles.

Installation requires automotive fabrication skills, including welding or specialized clamping. Professional installation is recommended.

Ensure the connecting pipe is the correct diameter (1.75 inches) and that the flare on the Jetex bend is not damaged. Minor adjustments to the connecting pipe's end may be needed.

Verify the connection is properly welded or clamped. Ensure the flared and slotted end is fully engaged with the connecting pipe. Re-weld or tighten clamps as necessary.

Clean the affected area thoroughly. Apply a high-temperature exhaust primer and paint for protection. For significant rust, replacement may be necessary.