Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, dirt, and algae. For bare wood, use a suitable primer. For previously painted or varnished surfaces, lightly sand and remove dust.
Application: Stir the paint thoroughly before use. Apply an even coat using a good quality brush or a spray applicator. Avoid applying in very wet, cold, or humid conditions, or in direct strong sunlight.
Drying: The paint dries quickly, allowing for recoating in 2-8 hours depending on conditions. Ensure adequate ventilation during application and drying.
Compatibility: Suitable for wood, brick, stone, and terracotta. Not recommended for direct application on plastics or metals without a suitable primer.
Care: Clean brushes and equipment immediately after use with water. Once dry, the finish is water-resistant. Clean painted surfaces with a damp cloth and mild detergent if necessary.