Best current price£122.23from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£122.23Visit shop Peak Scr100 Atlas Scr Thyristor And Triac Analyser 5026686029390
Visit shop3 offers from £122.23 - £125.23
View price history by clicking the chart icon.
1 offer from £128.12
View price history by clicking the chart icon.
The Peak Atlas SCR100 is designed for electronic technicians and hobbyists who need to quickly identify and analyze thyristors and triacs. Its primary benefit is rapid, unambiguous part identification and pinout determination, saving significant diagnostic time. A potential caveat is its specialized nature, focusing solely on SCRs and triacs, not other semiconductor types. This device instantly identifies component type, pinout, gate sensitivity, and gate voltage drop with simple probe connections.
| Model Part Number | SCR100 |
|---|---|
| Brand | Peak |
Its primary function is to rapidly identify thyristors (SCRs) and triacs, determine their pinout (Anode, Cathode, Gate), categorize their gate sensitivity, and measure their gate voltage drop.
No, the SCR100 is specifically designed for thyristors (SCRs) and triacs. It will not provide accurate results for other types of semiconductor devices like diodes or transistors.
You can connect the test probes to the component leads in any order. The analyser will automatically determine the correct pinout regardless of probe placement.
Gate sensitivity refers to the amount of current or voltage required to trigger the thyristor or triac into its conducting state. The SCR100 categorizes this to help you understand the component's requirements.
The identification and measurement process is very rapid, typically completing within seconds of pressing the 'Test' button.
The SCR100 can still attempt to identify the component type and pinout even if it's faulty. However, readings might be erratic or indicate an unknown component if the damage is severe.
Please refer to the product manual for specific power requirements. If battery-operated, ensure fresh batteries are installed for optimal performance.
Check the power source. If battery-powered, replace the batteries. Ensure test probes are securely connected to the device.
Ensure good, clean contact between the test probes and the component leads. Check that the component is properly seated and not damaged. Verify the component is indeed a thyristor or triac.
The component may not be a thyristor or triac, or it may be damaged beyond the analyser's capability to identify. Double-check the component's datasheet or markings.
Setup: The Peak Atlas SCR100 requires no complex setup. Ensure the device is powered on (if applicable, check manual for power source). Connect the provided test probes to the component under test. The orientation of the probes does not matter for initial identification.
Compatibility: This analyser is designed to test a *very wide range* of thyristors and triacs. It is compatible with devices from different manufacturers and across various power ratings. However, it is specifically designed for SCRs and triacs and will not provide meaningful results for other semiconductor types like diodes, transistors, or integrated circuits.
Care: To maintain optimal performance:
